Pumping station
|
The Victorian Abbey Mill pumping station on the London trunk sewerage system - no longer in use. |
Contents |
[edit] Introduction
A pumping station is a facility designed to draw and transfer fluids (such as water or sewage) from one location to another. This may be required in low lying areas when the location of the facility prevents the use of just gravity to lift the fluids for distribution.
Pumping stations are sometimes called pumphouses (when associated with irrigation systems or drilled wells), package pumping stations or packaged pumping stations (when used to describe private pumping stations) or lift stations (when describing systems designed for pumping waste or sewage). A pumping station may also be part of a hydroelectric facility.
[edit] Types of pumping stations
Pumping stations can be installed in situations such as; housing estates, healthcare or education campuses, commercial sites, industrial parks and so on. They may even be used for personal residences (such as in situations where a sewer passes over an incline). Depending on their application, facilities may use components including pumps, tanks (also referred to as collection chambers or wet wells), float switches, controllers, pipework and other mechanical devices.
|
The ornate interior of the Victorian Crossness pumping station. |
[edit] Canal water supplies
In situations where the location of the canal may not be able to reliably maintain the water levels needed to operate the locks, pumping stations may be used to draw water from other locations into the higher levels of the canals. Pumping stations may also be used to transport water from the low locks to the upper locks. This type of arrangement may be referred to as a back pumping system.
[edit] Land drainage
Water pumping stations are sometimes used to drain water from low lying areas that would otherwise be saturated and unsuitable for agriculture. This method may be deployed due to challenges brought on by elevation factors that prevent the use of canals.
[edit] Wastewater pumping stations
These systems are designed to transport waste or sewage material. The material is collected in a chamber (or wet well) until it reaches the level where the pump is activated.
[edit] Private pumping stations
These systems were once used by privately run developments or associations to transport surface water or waste water to a higher elevation.
In 2010, the Government decided that most private pumping stations that form part of the sewer or lateral drain systems that connect to the public sewer network should be transferred to the ownership of the regulated sewerage companies in England and Wales. The deadline for these transfers (referred to as pumping station adoptions) was October 2016.
Ref [[w/index.php?title=W/index.php%3Ftitle%3DW/index.php%3Ftitle%3DW/index.php%3Ftitle%3DW/index.php%3Ftitle%3DRef_https://www.ofwat.gov.uk/publications/transfer-of-private-sewers/%26action%3Dedit%26redlink%3D1%26action%3Dedit%26redlink%3D1%26action%3Dedit%26redlink%3D1%26action%3Dedit%26redlink%3D1&action=edit&redlink=1|https://www.ofwat.gov.uk/publications/transfer-of-private-sewers/]]
[edit] Related articles on Designing Buildings
- Civil Engineering during the Industrial Revolution in Britain.
- Filtration.
- How canals work.
- Ofwat.
- Sewerage.
- Thames tideway tunnel
- The redevelopment of Leicester's sewerage system by Joseph Gordon.
- Water Industry (Scotland) Act 2002.
- Water pressure.
[edit] External resources
Featured articles and news
Costs and insolvencies mount for SMEs, despite growth
Construction sector under insolvency and wage bill pressure in part linked to National Insurance, says report.
The place for vitrified clay pipes in modern infrastructure
Why vitrified clay pipes are reclaiming their role in built projects.
Research by construction PR consultancy LMC published.
Roles and responsibilities of domestic clients
ACA Safety in Construction guide for domestic clients.
Fire door compliance in UK commercial buildings
Architect and manufacturer gives their low down.
Plumbing and heating for sustainability in new properties
Technical Engineer runs through changes in regulations, innovations in materials, and product systems.
Awareness of the Carbon Border Adjustment Mechanism
What CBAM is and what to do about it.
The new towns and strategic environmental assessments
12 locations of the New Towns Taskforce reduced to 7 within the new towns draft programme and open consultation.
Buildings that changed the future of architecture. Book review.
The Sustainability Pathfinder© Handbook
Built environment agency launches free Pathfinder© tool to help businesses progress sustainability strategies.
Government outcome to the late payment consultation, ECA reacts.
IHBC 2025 Gus Astley Student Award winners
Work on the role of hewing in UK historic conservation a win for Jack Parker of Oxford Brookes University.
Future Homes Building Standards and plug-in solar
Parts F and L amendments, the availability of solar panels and industry responses.
How later living housing can help solve the housing crisis
Unlocking homes, unlocking lives.
Preparing safety case reports for HRBs under the BSA
A new practical guide to preparing structural inputs for safety cases and safety case reports published by IStructE.
Male construction workers and prostate cancer
CIOB and Prostate Cancer UK encourage awareness of prostate cancer risks, and what to do about it.























