What is EN 14511?
Contents |
[edit] What is EN 14511?
EN 14511 sets out standardised performance and rating terms for air-conditioning units, heat pumps and liquid chilling packages that supply space heating or cooling. EN 14511 is used for a determination of the Coefficient of Performance (COP) that gauges the performance of a heat pump.
[edit] What is the COP of a heat pump?
The Coefficient of Performance (COP), as set by EN 14511, is a ratio of the output of the heat pump against the power input in specific laboratory conditions. It is a simple indicator of the energy efficiency of a heat pump. The higher the declared COP of the heat pump, the greater the expected energy efficiency will be. To arrive at the rating, the COP is calculated from data gathered at particular temperatures of the energy source and flow. This can often result in a higher COP rating than the heat pump will achieve when installed.
[edit] The COP and heat pump selection
COP values can be certified through independent testing and a verification process. The COP value is the first likely factor to influence the selection of a heat pump. It is therefore vital that certified and tested values are provided. The energy efficiency and resulting renewables energy contribution of a heat pump are largely determined by the correct specification of the project’s particulars. The sizing and system design will affect the energy efficiency of the system and the building itself. The COP alone is not sufficient to determine the best energy solution for a project, as it does not reflect the true conditions or the project’s energy strategy. Furthermore, a more complex analysis would be required. Please contact our industry experts to discuss in detail which heat pump solution is most suitable for your next project. We can advise on heat pump specification that will reflect your long-term energy strategy and achieve on-site renewable targets that will help to future proof your project.
--Glen Dimplex Heating & Ventilation 14:59, 10 Aug 2021 (BST)
[edit] Related articles on Designing Buildings
- Air source heat pumps.
- Biomass.
- BSRIA domestic hot water heat pumps testing.
- Domestic building services compliance guide.
- Feed-In tariff.
- Ground source heat pump.
- Heat pump and wind turbine sound calculations for permitted development installations.
- Making the most of renewable energy systems DG 531.
- Microgeneration certification scheme
- Micro CHP.
- Micro grid.
- Microgeneration.
- Noise v sound.
- Non-domestic building services compliance guide.
- Pre-completion sound testing.
- Renewable energy.
- Renewable Heat Incentive.
- Renewable Energy Consumer Code RECC.
- Solar photovoltaics.
- Solar thermal.
- Sound.
- Sound absorption.
- Sound absorption coefficient.
- Sound frequency.
- UKAS accreditation for sound absorption testing.
- What is EN 14825?
- What is EN 14511?
Featured articles
Check out some of the best features and news from Designing Buildings as well as key stories from around the web.
Bridging the gap between clients and contractors
Concerns remain around contractor quality, capability, and delivery.
Construction Management, 10 June.
Heat pumps beat boilers in new home tests.
Building Safety Act implementation in Wales
CIAT to host industry panel on 26 June.
New and updated CLC building safety guidance.
New UK National Buildings Database.
Building Safety Wiki Interviews
Chief executive of the British Woodworking Federation.
Planning condition discharge in England and Wales
A brief explanation from a building compliance expert, with further links.
Overheating guidance and tools for building designers
Guidance for dealing with element of building fabric control that have increasing importance.
Shading for housing, a design guide
From the Good Homes Alliance and British Blind and Shutter Association.
UK Standard Skills Classification (SSC)
A shared framework for describing skills needs.
Social media ban consultation comes to close
CIOB urges UK Government to consider social media’s role in careers guidance in ban debate.