Barrier wall system
The term ‘barrier wall’ is used to refer to a system of external wall assembly that maintains weather-tightness by preventing the intrusion of air, water and vapour. Barrier walls rely on the integrity of the outermost surfaces and construction joints, and are considered a cost-effective alternative to cavity or solid wall assemblies.
The cladding material should be impervious to the elements. Common examples of barrier wall systems include:
- Single-skin metal wall panels.
- Solid-metal wall cladding.
- Precast concrete panels.
- Insulated metal-wall panels.
- Exterior insulation and finishing system (EIFS).
The exterior cladding in a barrier wall system serves as the main drainage plane – the element exposed to the weather. This differs from a cavity wall system where the main drainage plane and defensive line against bulk rainwater penetration is inside the cavity.
Careful installation of a barrier wall is crucial as the joints between facing units must be well sealed. The gaskets and caulking must be installed so that no water and/or air vapour can leak inside the cavity and damage the building envelope. There are often complex interface details that require specialist installation by professionals.
Although barrier wall systems often have a lower initial cost, this should be considered alongside the fact that they require a relatively high level of routine maintenance to remain effective over time as continued exposure to wind and rain can degrade the seals and lead to failure. Typically, they tend to be installed makes them more accessible should inspection or repairs be required.
[edit] Related articles on Designing Buildings Wiki
Featured articles and news
Costs and insolvencies mount for SMEs, despite growth
Construction sector under insolvency and wage bill pressure in part linked to National Insurance, says report.
The place for vitrified clay pipes in modern infrastructure
Why vitrified clay pipes are reclaiming their role in built projects.
Research by construction PR consultancy LMC published.
Roles and responsibilities of domestic clients
ACA Safety in Construction guide for domestic clients.
Fire door compliance in UK commercial buildings
Architect and manufacturer gives their low down.
Plumbing and heating for sustainability in new properties
Technical Engineer runs through changes in regulations, innovations in materials, and product systems.
Awareness of the Carbon Border Adjustment Mechanism
What CBAM is and what to do about it.
The new towns and strategic environmental assessments
12 locations of the New Towns Taskforce reduced to 7 within the new towns draft programme and open consultation.
Buildings that changed the future of architecture. Book review.
The Sustainability Pathfinder© Handbook
Built environment agency launches free Pathfinder© tool to help businesses progress sustainability strategies.
Government outcome to the late payment consultation, ECA reacts.
IHBC 2025 Gus Astley Student Award winners
Work on the role of hewing in UK historic conservation a win for Jack Parker of Oxford Brookes University.
Future Homes Building Standards and plug-in solar
Parts F and L amendments, the availability of solar panels and industry responses.
How later living housing can help solve the housing crisis
Unlocking homes, unlocking lives.
Preparing safety case reports for HRBs under the BSA
A new practical guide to preparing structural inputs for safety cases and safety case reports published by IStructE.
Male construction workers and prostate cancer
CIOB and Prostate Cancer UK encourage awareness of prostate cancer risks, and what to do about it.