Calorific value
The term ‘calorific value’ (CV) is a measure of heating power, and refers to the amount of energy released when a fuel is completely combusted under specific conditions. For solid and liquid fuels this is measured at constant volume and for gaseous fuels it is measured at constant pressure.
Calorific vales for a range of fuels are published by the UK government.
Typically, calorific vales are expressed in Megajoules per cubic metre (MJ/m3) for solid and liquid fuels or Megajoules per kilogram (MJ/kg) for gaseous fuels.
Calorific value can be expressed as a Net Calorific Value (NCV, or Lower Heating Value), or a Gross Calorific Value (GCV, a Higher Heating Value):
- The Net Calorific Value considers that the combustion products contain water of combustion to the vapour state, and so the heat energy in the water is not recovered.
- The Gross Calorific Value considers that the water of combustion is condensed, and so the heat energy in the water is recovered.
NB Embodied Carbon, The Inventory of Carbon and Energy (ICE), By Prof. Geoffrey Hammond and Craig Jones, Ed. Fiona Lowrie and Peter Tse, published by BSRIA in 2011, defines the Calorific Value (CV) of energy as: ‘The energy content of a fuel (as may be released through combustion). It may be expressed as a gross calorific value (GCV) or net calorific value (NCV). The former is always larger than (or equal to) the latter. The difference is due to latent heat (energy) remaining in condensation (water vapour) after combustion. The difference is typically 5-10 per cent (e.g. 10 per cent for natural gas, 5 per cent for coal).’
Combined heat and power quality assurance (CHPQA) guidance notes, published by the Department for Business, Energy & Industrial Strategy in 2014, suggests that the: ‘Gross Calorific Value (GCV) of a fuel is the total energy available from that fuel (solid, liquid or gas) when it is completely burnt. It is expressed as heat per unit weight or volume of fuel. ‘Gross’ signifies that the water formed or liberated during combustion is condensed to the liquid phase. The GCV of a solid or liquid fuel is determined at constant volume and the GCV of a gaseous fuel is determined at constant pressure.’
[edit] Related articles on Designing Buildings
Featured articles and news
The benefits of writing articles for your organisation
How to create a profile for your organisation and publish for free.
No Falls Week. The importance of safe working at height
What to expect and what is on offer to avoid accidents.
Scottish Government action to reach net-zero targets
Retrofit expert group highlight critical actions needed.
A forward thinking, inclusive global community of members.
From engineered product life-spans, to their extension.
Circular economy in the built environment
A brief description from 2021. Where are we now?
Mental Health Awareness Week with ABS
Architects Benevolent Society programme of activity.
CLC publishes domestic retrofit competency framework
Roadmap of Skills for net zero.
May 13-19: Moving more for our mental health.
Understanding is key to conservation.
Open industry engagement survey seeks responses
Institutions and the importance of engagement.
National Retrofit Hub unveils new guide
Digital Building Logbooks and Retrofit: An Introduction.
Enhancing construction site reporting efficiency
Through digitisation and the digital revolution.
Noise in the built environment
BSRIA guide TG 20/2021.
17,000 people suffer conditions as a result of exposure to excessive noise at work.
Turning down the noise: Auditory health
A pervasive risk with far-reaching consequences.
Getting the most out of heat pumps and heating
How heat pumps work and how they work best.
Electrotechnical excellence, now open for entries.
Comments
[edit] To make a comment about this article, or to suggest changes, click 'Add a comment' above. Separate your comments from any existing comments by inserting a horizontal line.