- Project plans
- Project activities
- Legislation and standards
- Industry context
Last edited 12 Jan 2018
Tensile surfaces, that is, surfaces which carry only tension and no compression or bending, rely on double curvature for their stability. Stability is provided by the opposition of two curvatures which enable the surface to be tensioned without losing its form.
Tensioning the surface reduces its elasticity and so its tendency to deform under load, and the curvature itself means that the surface will deform less for any given extension.
Tensile surfaces can be used in buildings to create thin, long span enclosures, such as roofs for sports stadia, shopping centres, atria and so on. Typically they are constructed using a PVC-coated polyester or PTFE coated glass fabric, typically just 1 mm thick.
Double curvature can be anticlastic or synclastic.
|Anticlastic (saddle-shaped).||Synclastic (dome-shaped)|
Synclastic surfaces are those in which the centres or curvature are on the same side of the surface. This is a dome-shape. This can be created with an architectural fabric by inflation – that is, air pressure within the dome maintains the form of the surface when it is tensioned, rather than the opposition of the curvatures.
This is opposed to anticlastic surfaces, which are those in which the centres of curvature are located on opposing sides of the surface. This is commonly-described as a saddle shape. A hyperbolic paraboloid is an anticlastic surface.
 Related articles on Designing Buildings Wiki
- Barrel vault.
- Biaxial bending.
- Concept structural design of buildings.
- Conoid shell.
- Fabric structures.
- Hyperbolic paraboloid.
- Limit state design.
- Structural engineer.
- Tensile structures.
- The development of structural membranes.
- The structural behaviour of architectural fabric structures.
- Types of dome.
- Why are domes popular?
Featured articles and news
The quality of Cambridge owes as much to its open spaces as to its architectural uniqueness.
If events occur that cause the completion of the works to be delayed then these may be compensation events.
BSRIA's new Building MOTs Scheme is designed to provide guidance on the next steps after compliance.
At an ICE discussion, the focus was on delivering a Northern Infrastructure Strategy based on opportunity for all.
The Considerate Constructors Scheme officially launch the new Ultra Site status for contractors and supply chains.
The risk of specification errors in the cladding sector is "worryingly high" after Grenfell, according to major distributor.
Here is our outline work plan for a private sector design and build project.
BRE are to publish new guidance aimed at assuring buyers as to the merits of off-site construction methods.
Who are the various different stakeholders in development projects? Find out in our introductory article.
How a BRE office became the centre-piece for major biophilic design research.