Types of brick arches
The archway in this Georgian brick facade in Limerick has been restored back to its original condition. |
Contents |
[edit] Introduction
Bricks are small rectangular blocks that can be used to form parts of buildings, typically for the construction of walls and paving and for more complex features such as arches. Arches are compressive structures, that is, there are no tensile stresses. They are self-supporting - stabilised by the force of gravity acting on their weight to hold them in compression. This makes them very stable and efficient, capable of larger spans and supporting greater loads than horizontal beams.
[edit] Brick arch construction types
The construction of traditional brick arches is dependent on the arrangement of the bricks over the opening. Wedge-shaped blocks, called voussoirs, are set flank-to-flank with the upper edge being wider than the lower edge. Downward pressure on the arch has the effect of forcing the voussoirs together instead of apart. The voussoir that is positioned in the centre of the arch is known as the key.
In ordinary brickwork, there are two standard types of arches: the rough segmental arch and the gauged (or cut) semi-circular arch.
[edit] Rough segmental arch
Also referred to as a rough arch, this is one of the most common types of brick arches. It can be used in most types of construction.
Because it forms part of a circle and is composed of half-brick rings, it is very simple to build. A half brick ring is a row of bricks showing heading faces only.
The term 'rough' in this context means that the bricks used in the arch are not cut or trimmed to any shape or pattern - they are simply left in their original condition. This means they present their rectangular ends to view.
In some cases, it may be necessary to incorporate rough axed arches, which are arches made of roughly cut hard bricks. For the sake of appearance, these bricks are cut and rough trimmed to fit the wedge shape of the voussoirs. Rough axed arches are not frequently used in modern construction techniques due to the extra cost, preparation time and level of skill required. It is also extremely difficult to cut axed arches from certain modern hard brick materials.
[edit] Gauged semi-circular arch
This type of arch is made of finely cut soft bricks. The bricks are fashioned from a design template that is used to produce the correct shape.
These special bricks (known as ‘rubbers’) are fired at a low temperature to make them soft enough to shape. They are then repeatedly rubbed and measured (or ‘gauged’) until they are the proper size. Due to the nature of this process, this type of arch can be quite costly and requires a significant degree of skill. In some instances, it may be possible to use specially made hard bricks in gauged arches.
The bricks in this type of construction are gauged in such a way that the joints radiate from a common centre point. This means that the key is placed so the centre line of the arch passes through the centre of the brick (like a keystone in an arch constructed from stone).
[edit] A lintel classified as a brick arch
A third brick arch construction technique is the soldier arch, although this method is more accurately categorised as a type of lintel. Soldier arches are not composed of elements that support each other while creating the form of a curve, which is why they are not technically arches.
This method of construction consists of bricks placed on their ends, which is why they are referred to as soldiers. It is a flat arch that has the long sides of the uncut bricks (also referred to as stretchers) set vertically.
Brick soldiers are not mutually self supporting. They require another other type of support, such as a wooden frame or a lintel.
Early types of this sort of arch were reinforced by mild steel rods which passed through perforations in the bricks. Later types are supported by special projections on pre-cast concrete or steel lintels.
[edit] Related articles on Designing Buildings
Featured articles and news
BSRIA Sentinel Clerk of Works Training Case Study
Strengthening expertise to enhance service delivery with integrated cutting-edge industry knowledge.
Impact report from the Supply Chain Sustainability School
Free sustainability skills, training and support delivered to thousands of UK companies to help cut carbon.
The Building Safety Forum at the Installershow 2025
With speakers confirmed for 24 June as part of Building Safety Week.
The UK’s largest air pollution campaign.
Future Homes Standard, now includes solar, but what else?
Will the new standard, due to in the Autumn, go far enough in terms of performance ?
BSRIA Briefing: Cleaner Air, Better tomorrow
A look back at issues relating to inside and outside air quality, discussed during the BSRIA briefing in 2023.
Restoring Abbotsford's hothouse
Bringing the writer Walter Scott's garden to life.
Reflections on the spending review with CIAT.
Retired firefighter cycles world to raise Grenfell funds
Leaving on 14 June 2025 Stephen will raise money for youth and schools through the Grenfell Foundation.
Key points for construction at a glance with industry reactions.
Functionality, visibility and sustainability
The simpler approach to specification.
Architects, architecture, buildings, and inspiration in film
The close ties between makers and the movies, with our long list of suggested viewing.
SELECT three-point plan for action issued to MSPs
Call for Scottish regulation, green skills and recognition of electrotechnical industry as part of a manifesto for Scottish Parliamentary elections.
UCEM becomes the University of the Built Environment
Major milestone in its 106-year history, follows recent merger with London School of Architecture (LSE).
Professional practical experience for Architects in training
The long process to transform the nature of education and professional practical experience in the Architecture profession following recent reports.
A people-first approach to retrofit
Moving away from the destructive paradigm of fabric-first.
New guide for clients launched at Houses of Parliament
'There has never been a more important time for clients to step up and ...ask the right questions'
The impact of recycled slate tiles
Innovation across the decades.
EPC changes for existing buildings
Changes and their context as the new RdSAP methodology comes into use from 15 June.