Thermal zones in building design
In the design of heating ventilation and air conditioning systems (HVAC), a ‘zone’ is an area of a building in which temperature is controlled by one thermostat. This is not the same as a single space or room. For example, a small house, in which thermal demand is relatively constant throughout, might be controlled by a single thermostat and so considered a single zone.
In a more complex, larger building where there may be significant differences in thermal demand, there may be multiple zones.
In simple buildings, a single zone might be supplied by a single boiler, or air handling unit. In more complex buildings with varying demands, multiple zones might be supplied by a single central HVAC system, but each zone might correspond to a single terminal unit that provides local thermostatic control.
Carefully designed zoning can help rationalise different thermal demands and so reduce the number of HVAC subsystems required. This can reduce capital and operational costs. It is important that this is considered as an integral part of the concept design stage and that HVAC is not simply added on at the end of the design process.
HVAC zones can also refer to areas of humidity control, for example office spaces might require humidity control, whilst garages might not.
[edit] Related articles on Designing Buildings Wiki
Featured articles and news
Change of use legislation breaths new life into buildings
A run down on Class MA of the General Permitted Development Order.
Solar generation in the historic environment
Success requires understanding each site in detail.
Level 6 Design, Construction and Management BSc
CIOB launches first-ever degree programme to develop the next generation of construction leaders.
Open for business as of April, with its 2026 prospectus and new pipeline of housing schemes.
The operational value of workforce health
Keeping projects moving. Incorporating unplanned absence and the importance of health, in operations.
A carbon case for indigenous slate
UK slate can offer clear embodied carbon advantages.
Costs and insolvencies mount for SMEs, despite growth
Construction sector under insolvency and wage bill pressure in part linked to National Insurance, says report.
The place for vitrified clay pipes in modern infrastructure
Why vitrified clay pipes are reclaiming their role in built projects.
Research by construction PR consultancy LMC published.
Roles and responsibilities of domestic clients
ACA Safety in Construction guide for domestic clients.
Fire door compliance in UK commercial buildings
Architect and manufacturer gives their low down.
The new towns and strategic environmental assessments
12 locations of the New Towns Taskforce reduced to 7 within the new towns draft programme and open consultation.
Buildings that changed the future of architecture. Book review.