The Art of Pyrography
Contents |
Introduction
Pyrography is the process of applying heat to wood to burn marks and decoration into it. By using basic tools such as a soldering iron this method can create works of art from timber.
Sometimes referred to as Pyrogravure, pokerwork or wood burning, by controlling the application of heat with such tools as a poker, a broad range of tones and shades can be applied.
The history of wooden art
The term means ‘writing with fire’ and combines the Greek pur (fire) and graphos (writing). The art of burning wood can be practised using specialised tools and equipment or a metal implement simply heated from fire, or even a magnifying lens concentrated by sunlight. It began in the 17th century, and became increasingly popular by the 19th century, in a crude form of pokerwork.
During the Victorian era, the pyrography machine sparked huge interest in woodcraft, and the term was coined. As time progressed, the 19th century saw an even bigger curiosity, and in the 20th century, the electric pyrography hot wire wood etching machine further automated the process.
Woods and pyrography
This method works best with fine grain woods such as lime, beech or sycamore, which are also best for beginners. For safety reasons, pyrography should not be practised on pressure treated woods or composite materials such as plywood or MDF.
Essentially you can use any wood for a pyrography project, although soft woods will burn at lower temperatures, while harder woods will only take to alteration from higher temperatures. A key point is to prepare your wood. If it is a raw piece of wood, you will need to sand it suitably depending on the way you want the grain. It is much easier to burn with the way of the grain.
Varying the tip, the temperature of the iron, or the way of applying it can achieve many different effects. In most pyrography, after the wood is burned, it is usually coloured. Lighter hardwoods, like sycamore, basswood, birch and beech are a common wood to be used as the fine grain is not obtrusive.
Characteristics of wood in pyrography
The wood you choose in pyrography can change the finished effect. From the hardness, to the grain, figure, texture and colour, the classification of wood will affect the art. Softwood burns faster than hardwood, so do not require the marker to be as hot.
The grain is the direction of the fibres in the cells of the wood - it is important to sand with the grain. It is a key factor, as it can cause deviation when using a woodturning pen unless pressure is applied.
The figure is the natural design or pattern visible from the cut surface of the wood. This should always be taken into consideration when planning your pyrography design. The texture of the wood can also change your planning.
Whether a beginner or an expert, you should avoid creating intricate designs on uneven or coarse wood textures. Wood-burning should simply enhance the natural beauty of the wood, so try not to hide the natural texture, or grain if possible.
Related articles on Designing Buildings
Featured articles and news
ECA 2024 Apprentice of the Year Award
Entries open for submission until May 31.
UK gov apprenticeship funding from April 2024
Brief summary the policy paper updated in March.
For the World Autism Awareness Month of April.
70+ experts appointed to public sector fire safety framework
The Fire Safety (FS2) Framework from LHC Procurement.
Project and programme management codes of practice
CIOB publications for built environment professionals.
The ECA Industry Awards 2024 now open !
Recognising the best in the electrotechnical industry.
Sustainable development concepts decade by decade.
The regenerative structural engineer
A call for design that will repair the natural world.
Buildings that mimic the restorative aspects found in nature.
CIAT publishes Principal Designer Competency Framework
For those considering applying for registration as a PD.
BSRIA Building Reg's guidance: The second staircase
An overview focusing on aspects which most affect the building services industry.
Design codes and pattern books
Harmonious proportions and golden sections.
Introducing or next Guest Editor Arun Baybars
Practising architect and design panel review member.
Quick summary by size, shape, test, material, use or bonding..