Die casting
Die casting is a metal moulding process. The two pieces of the mould are referred to as the dies and together they create a chamber. Molten metal is forced at pressure between the hot or cold dies to create the desired shape prior to cooling.
The process is very similar to injection moulding which is used in the plastics and polymer industry.
A die in die casting is normally a hardened steel mould with a high melting point if used in hot casting, in order retain shape and consistency during the processing of the other metal being processed - such as zinc, copper, aluminium, magnesium, lead, pewter, and tin-based alloys.
[edit] Related articles on Designing Buildings
Featured articles
Check out some of the best features and news from Designing Buildings as well as key stories from around the web.
Construction Management, 2 June
Construction deaths halve in two years.
Green Book changes to drive investment in all parts of UK.
Minimum energy efficiency standards (MEES)
CIAT briefing on response to consultations for privately rented non-domestic properties.
Connect, collaborate, shape the future
Registration now live for UK Construction Week Birmingham.
CIOB announces Saul Humphrey FCIOB as new President for 26/27 term.
A quick, simple, and zero-bills solution to prevent overheating.
The adaptive reuse of large industrial structures.
Promoting the circular economy by extending the life of buildings.
CIAT responds to Climate Change Committee report
An urgent wake-up call for both government and the built environment.
Construction Management, 24 June
FMB pilot aims to build pipeline of site-ready tradespeople.
A quick introduction.
CLC publishes Mental Health Joint Code of Practice.
A quick introduction to its uses and risks.