Air permeability
Approved Document L, Conservation of fuel and power, Volume 1: Dwellings, 2021 edition incorporating 2023 amendments, defines air permeability as:
|
The measure of airtightness of the building fabric. It is defined as the air leakage rate per hour per m2 of envelope area at the test reference pressure differential of 50Pa or 4Pa.
|
The limiting air permeability is the worst allowable air permeability.
The design air permeability is the target value set at the design stage, and must always be no worse than the limiting value.
The assessed air permeability is the value used in establishing the Dwelling Emission Rate (DER) and Dwelling Fabric Energy Efficiency (DFEE) rate and is based on specific measurement of the dwelling concerned or on measurements of other dwellings of the same dwelling type.
The BSRIA guide to 'Commissioning Air Systems' (BG 49/2024) by Keith Barker defines air permeability as: 'The amount of air leakage (sometimes referred to as air tightness or Building Leakage Rate) from the building as tested prior to the start of functional testing.' See also CIBSE TM23:2022 'Testing Buildings for Air Leakage' for further guidance.
[edit] Related articles on Designing Buildings
- Air permeability in isolation rooms.
- Air permeability testing.
- Air tightness in buildings.
- Approved documents.
- Building emission rate.
- Dwelling emission rate.
- Dwelling type.
- Energy performance certificates.
- Permeability.
- Standard assessment procedure.
- Target emission rate.
- The history of non-domestic air tightness testing.
Featured articles and news
Costs and insolvencies mount for SMEs, despite growth
Construction sector under insolvency and wage bill pressure in part linked to National Insurance, says report.
The place for vitrified clay pipes in modern infrastructure
Why vitrified clay pipes are reclaiming their role in built projects.
Research by construction PR consultancy LMC published.
Roles and responsibilities of domestic clients
ACA Safety in Construction guide for domestic clients.
Fire door compliance in UK commercial buildings
Architect and manufacturer gives their low down.
Plumbing and heating for sustainability in new properties
Technical Engineer runs through changes in regulations, innovations in materials, and product systems.
Awareness of the Carbon Border Adjustment Mechanism
What CBAM is and what to do about it.
The new towns and strategic environmental assessments
12 locations of the New Towns Taskforce reduced to 7 within the new towns draft programme and open consultation.
Buildings that changed the future of architecture. Book review.
The Sustainability Pathfinder© Handbook
Built environment agency launches free Pathfinder© tool to help businesses progress sustainability strategies.
Government outcome to the late payment consultation, ECA reacts.
IHBC 2025 Gus Astley Student Award winners
Work on the role of hewing in UK historic conservation a win for Jack Parker of Oxford Brookes University.
Future Homes Building Standards and plug-in solar
Parts F and L amendments, the availability of solar panels and industry responses.
How later living housing can help solve the housing crisis
Unlocking homes, unlocking lives.
Preparing safety case reports for HRBs under the BSA
A new practical guide to preparing structural inputs for safety cases and safety case reports published by IStructE.
Male construction workers and prostate cancer
CIOB and Prostate Cancer UK encourage awareness of prostate cancer risks, and what to do about it.