Butadiene
Contents |
[edit] What is butadiene?
Butadiene, buta means 4 carbons as in butane, and the diene means it contains two double-bonded carbons. It is referred to as 1,3-butadiene but also variations such as 1,2 and 1,4 butadiene, depending on the number of carbon atoms connected and thus stability. It is colourless gas with a odour of petrol, which breaks down quickly in the atmosphere, though is found in urban air as a result of motor vehicle emissions. Natural sources of 1,3-butadiene in the air come from Forest fires.
Butadiene is considered as a volatile organic compound or VOC. Organic compounds are defined in The Volatile Organic Compounds in Paints, Varnishes and Vehicle Refinishing Products Regulations 2012 as 'any compound containing at least the element carbon and one or more of hydrogen, oxygen, sulphur, phosphorus, silicon, nitrogen, or a halogen, with the exception of carbon oxides and inorganic carbonates and bicarbonates', with a volatile organic compound being 'any organic compound having an initial boiling point less than or equal to 250°C measured at a standard pressure of 101.3 kPa'
[edit] How is butadiene used and what materials contain it?
Butadiene was isolated from the pyrolysis of amyl alcohol in 1863 by the French chemist E. Caventou and in 1886 identified as the hydrocarbon butadiene by Henry Edward Armstrong isolated within pyrolysis products of petroleum. It has since been used in the chemical and plastics industries, because butadiene-based polymers have improved functionality, performance and safety, as well as lower costs. As such synthetic rubbers that are produced from butadiene for use in shoes, textiles, rubber and construction these include styrene-butadiene rubber, poly-butadiene rubber, styrene-butadiene latex, Acrylonitrile Butadiene Styrene (ABS), Styrene-Butadiene-Styrene (SBS), Styrene butadiene (SBR), chloroprene rubber and nitrile rubber. It is is also used in the refinement of petroleum, secondary lead smelting, water treatment, agricultural fungicide, and in the production of the raw material for nylon. In 2020 global production was estimated at 14.2 million tons, mainly for the polymer industry.
[edit] How is benzene harmful and how is it controlled?
Health effects caused by exposure to 1,3-butadiene are acute or chronic. Low acute exposure causes irritation to the eyes, throat, nose, and lungs and frostbite may also occur with skin exposure. Higher exposure can cause damage to the central nervous system, blurred vision, vertigo, tiredness, decreased blood pressure, headache, nausea, decreased pulse rate, and fainting. Chronic effects are more controversial, with several studies showing an increases in cardiovascular diseases and cancer, though strong causal relationships have only been shown in animal tests it is classified as a known human carcinogen.
Exposure can also occur from polluted air and water near chemical, plastic or rubber facilities; cigarette smoke; and ingestion of foods that are contaminated from plastic or rubber containers, but most likely auto mobile exhaust. Although 1,3-butadiene breaks down quickly in the atmosphere motor vehicle exhausts are a constant low levels source in ambient urban and suburban areas. Levels of emissions from vehicles and pollutants such as benzene and 1,3-butadiene have reduced over recent years as a direct result of air quality control schemes such as: Clean Air Zones in Birmingham, Bradford, Bristol, Portsmouth, Sheffield, and Tyneside (Newcastle and Gateshead). Low Emission Zones (LEZ) such as found in Glasgow as well as Ultra Low Emissions Zones (ULEZ) as introduced to parts of London on 2019.
[edit] Related articles on Designing Buildings
- Building related chemical reactions.
- BSRIA response to clean air strategy.
- COSHH.
- Deleterious materials in construction.
- Environmental legislation for building design and construction.
- Infrastructure under Mayor Sadiq Khan.
- Low emission zone for non-road mobile machinery.
- Sustainability in building design and construction
- Chemical element.
- T-Charge.
- Target emission rate TER
- Types of materials
- Types of plastic.
- Types of plastic in construction.
Featured articles and news
A case study and a warning to would-be developers
Creating four dwellings... after half a century of doing this job, why, oh why, is it so difficult?
Reform of the fire engineering profession
Fire Engineers Advisory Panel: Authoritative Statement, reactions and next steps.
Restoration and renewal of the Palace of Westminster
A complex project of cultural significance from full decant to EMI, opportunities and a potential a way forward.
Apprenticeships and the responsibility we share
Perspectives from the CIOB President as National Apprentice Week comes to a close.
The first line of defence against rain, wind and snow.
Building Safety recap January, 2026
What we missed at the end of last year, and at the start of this...
National Apprenticeship Week 2026, 9-15 Feb
Shining a light on the positive impacts for businesses, their apprentices and the wider economy alike.
Applications and benefits of acoustic flooring
From commercial to retail.
From solid to sprung and ribbed to raised.
Strengthening industry collaboration in Hong Kong
Hong Kong Institute of Construction and The Chartered Institute of Building sign Memorandum of Understanding.
A detailed description from the experts at Cornish Lime.
IHBC planning for growth with corporate plan development
Grow with the Institute by volunteering and CP25 consultation.
Connecting ambition and action for designers and specifiers.
Electrical skills gap deepens as apprenticeship starts fall despite surging demand says ECA.
Built environment bodies deepen joint action on EDI
B.E.Inclusive initiative agree next phase of joint equity, diversity and inclusion (EDI) action plan.
Recognising culture as key to sustainable economic growth
Creative UK Provocation paper: Culture as Growth Infrastructure.





















