Wall plug
Contents |
[edit] Outline
A wall plug (commonly called a rawl plug) is used to ensure screws driven into masonry walls provide a secure fixing. Without them, screws would not grip into masonry and would not provide adequate compressive force to ensure a secure, permanent fixing.
Installation usually involves ensuring first that the correct size plug is paired with the screw. As the screw must fit inside the plug, the hole to be drilled will be larger than it would be for the screw. The plug is inserted into the drilled hole and the screw is driven into the plug. As the screw penetrates the plug, it gradually forces the plug sides to expand outward, applying a compressive force against the masonry (which can be brick, block, concrete or plasterboard). The screw is tightened until it has fully penetrated into the plug, at which point it cannot be tightened any more.
Sometimes the screw turns indefinitely without tightening. This usually means the wrong size of plug has been used or the hole drilled is too big for the plug. One possible remedy is to take out the screw and take up the slack with matchsticks, filler, plaster pads or other material that will reduce the size of the hole, or to use a larger wall plug.
[edit] Composition
Typically, wall plugs are made of medium-duty, moulded plastic that can be used with a range of standard screws, from No 4 to No 14 sizes. They are usually tapered and profiled to increase their grip; they come in a range of profiles, colours and sizes.
Wall plugs are also supplied as extruded plastic – often straight tubes of 150mm-200mm lengths that must be cut to size according to requirements. But because they have straight sides, they must be cut shorter than the depth of the hole.
[edit] Threaded plugs
For screwing into less dense, friable walls, such as aerated concrete blocks, plugs are available with a thread on the outside; once screwed into the wall they form the socket for the screw and in all respects behave like ordinary wall plugs.
[edit] Nailable plugs
Nailable plugs come in various shapes and sizes and can be used with nails in masonry and plasterboard. They are useful when many fixing points must be made quickly. Both nail and plug are simply hammered-in as one fixing. Typical applications include fixing skirting boards, wall linings, battens and frames.
[edit] Related articles on Designing Buildings
Featured articles and news
Getting the most out of heat pumps and heating
How heat pumps work and how they work best.
Plumbing and heating for successful retrofit and renovation
Low temperature underfloor systems and heat pumps.
Cost-of-living crisis and home improvement plans
Starting on the right footing and top tips for projects.
Delays on construction projects
Types, mitigation and the acceleration of works.
From Chaucer to Fawlty Towers.
Electrotechnical excellence, now open for entries.
Net zero electricity grids BSRIA guide NZG 5/2024
Outlining the changes needed to transition to net zero.
CIOB Global Student Challenge 2024
Universitas Indonesia wins for second year running.
New project and cultural district described in detail.
The nature of EPCs, crticism and inaccuracies.
History, issues and redesign.
From waste recycling to energy performance the hierchy.
An introduction to WERCS and WEEE responsibilities
Dealing with 2 million tonnes of waste equipment a year.
Global BACS Market: analytics and optimisation
A BSRIA glance at building automation and control systems.
What it is and how to use it.
Types of insulating plaster by binder and insulant.
Investors in People: CIOB achieves gold
Reflecting a commitment to employees and members.
Scratching beneath the surface; a guide to selection.
ECA 2024 Apprentice of the Year Award
Entries open for submission until May 31.
UK gov apprenticeship funding from April 2024
Brief summary the policy paper updated in March.