Sling psychrometer
A sling psychrometer holds a wet-bulb thermometer and a dry-bulb thermometer. A dry-bulb thermometer is an ordinary thermometer, whilst a wet-bulb thermometer is a thermometer that has its bulb wrapped in cloth and moistened with distilled water.
When a sling psychrometer is swung round in the air, moisture will evaporate from the wet-bulb thermometer, reducing its temperature depending on the humidity of the air it is exposed to. The higher the humidity, the lower the rate of evaporation and so the higher the temperature recorded. Wet-bulb temperatures are the same as dry-bulb temperatures at a relative humidity of 100%, but otherwise will be lower than dry-bulb temperatures due to the cooling effect of evaporation (described as wet-bulb depression).
The two thermometers should give steady-state readings after a few minutes.
A sling psychrometer can be used to determine the physical and thermal properties of moist air by using standard tables and charts. Typically it is used to determine relative humidity. Some sling psychrometers include mechanisms to allow relative humidity to be read directly without needing to refer to tables.
Psychometric charts are complex graphs that represent the dry-bulb temperature, wet-bulb temperature, relative humidity, specific volume, dew point temperature, humidity ratio and enthalpy of moist air at known atmospheric pressure. The state of moist air can be determined from any two of these properties (such as wet-bulb temperature and dry-bulb temperature which can be read on a sling psychrometer) from which all other properties can then be determined.
[edit] Related articles on Designing Buildings Wiki
Featured articles and news
Costs and insolvencies mount for SMEs, despite growth
Construction sector under insolvency and wage bill pressure in part linked to National Insurance, says report.
The place for vitrified clay pipes in modern infrastructure
Why vitrified clay pipes are reclaiming their role in built projects.
Research by construction PR consultancy LMC published.
Roles and responsibilities of domestic clients
ACA Safety in Construction guide for domestic clients.
Fire door compliance in UK commercial buildings
Architect and manufacturer gives their low down.
Plumbing and heating for sustainability in new properties
Technical Engineer runs through changes in regulations, innovations in materials, and product systems.
Awareness of the Carbon Border Adjustment Mechanism
What CBAM is and what to do about it.
The new towns and strategic environmental assessments
12 locations of the New Towns Taskforce reduced to 7 within the new towns draft programme and open consultation.
Buildings that changed the future of architecture. Book review.
The Sustainability Pathfinder© Handbook
Built environment agency launches free Pathfinder© tool to help businesses progress sustainability strategies.
Government outcome to the late payment consultation, ECA reacts.
IHBC 2025 Gus Astley Student Award winners
Work on the role of hewing in UK historic conservation a win for Jack Parker of Oxford Brookes University.
Future Homes Building Standards and plug-in solar
Parts F and L amendments, the availability of solar panels and industry responses.
How later living housing can help solve the housing crisis
Unlocking homes, unlocking lives.
Preparing safety case reports for HRBs under the BSA
A new practical guide to preparing structural inputs for safety cases and safety case reports published by IStructE.
Male construction workers and prostate cancer
CIOB and Prostate Cancer UK encourage awareness of prostate cancer risks, and what to do about it.