Outdoor porcelain tiles
Contents |
[edit] Introduction
There are several types of porcelain tiles that are suitable for outdoor applications. Some of these products have properties that protect the durability of the coating under these conditions.
[edit] Frost resistance
The main indicator of exterior porcelain tiles is the frost resistance of the material. This characteristic is determined through a series of tests. The essence of the test consists of alternate freezing-thawing of the sample and studying the consequences of this.
The national certification procedure foresees 50 freeze-thaw cycles, but in practice, porcelain tiles should be able to withstand more than 200 cycles. The material itself should work in a temperature range from frost down to -50°C.
In addition, there is are special frost-resistant outdoor porcelain tiles which are suitable for laying in regions with a severe climate.
[edit] Water absorption
The high frost resistance of outdoor porcelain tiles is due to its low moisture absorption. The water absorption of this material does not exceed 0.05%, which is very low.
The destruction of the material occurs after the penetration of moisture into its pores, which begins to freeze, increases in volume and destroys the structure.
[edit] Wear resistance
The wear resistance of outdoor porcelain tiles is determined by three criteria: hardness, resistance to deep wear and resistance to wear.
For outdoor use, it is sufficient to use class 7 porcelain tiles according to the Mohs hardness scale. The Mohs scale designates the hardness class of a material from one to 10 (where one is talc and 10 is diamond).
According to EN 154 (European standard), abrasian tests are carried out with a corundum roller. Depending on the speed of this roller on the surface of the porcelain tiles, which has not caused visible damage, the material is assigned a certain abrasion resistance class (PEI I - PEI V).
The deep wear resistance index is determined by the volume of material removed from the tile during testing. For outdoor porcelain tiles, this figure is in the range of 110-140 mm. According to EN 102, the limit for floor coverings must not exceed 250 mm.
[edit] Related articles on Designing Buildings Wiki
Featured articles and news
Key points for construction at a glance with industry reactions.
Functionality, visibility and sustainability
The simpler approach to specification.
Architects, architecture, buildings, and inspiration in film
The close ties between makers and the movies, with our long list of suggested viewing.
SELECT three-point plan for action issued to MSPs
Call for Scottish regulation, green skills and recognition of electrotechnical industry as part of a manifesto for Scottish Parliamentary elections.
UCEM becomes the University of the Built Environment
Major milestone in its 106-year history, follows recent merger with London School of Architecture (LSE).
Professional practical experience for Architects in training
The long process to transform the nature of education and professional practical experience in the Architecture profession following recent reports.
A people-first approach to retrofit
Moving away from the destructive paradigm of fabric-first.
International Electrician Day, 10 June 2025
Celebrating the role of electrical engineers from André-Marie Amperè, today and for the future.
New guide for clients launched at Houses of Parliament
'There has never been a more important time for clients to step up and ...ask the right questions'
The impact of recycled slate tiles
Innovation across the decades.
EPC changes for existing buildings
Changes and their context as the new RdSAP methodology comes into use from 15 June.
Skills England publishes Sector skills needs assessments
Priority areas relating to the built environment highlighted and described in brief.
BSRIA HVAC Market Watch - May 2025 Edition
Heat Pump Market Outlook: Policy, Performance & Refrigerant Trends for 2025–2028.
Committing to EDI in construction with CIOB
Built Environment professional bodies deepen commitment to EDI with two new signatories: CIAT and CICES.
Government Grenfell progress report at a glance
Line by line recomendation overview, with links to more details.
An engaging and lively review of his professional life.
Sustainable heating for listed buildings
A problem that needs to be approached intelligently.
50th Golden anniversary ECA Edmundson apprentice award
Deadline for entries has been extended to Friday 27 June, so don't miss out!
CIAT at the London Festival of Architecture
Designing for Everyone: Breaking Barriers in Inclusive Architecture.
Mixed reactions to apprenticeship and skills reform 2025
A 'welcome shift' for some and a 'backwards step' for others.