Metallic, insulated flexible ductwork
BS EN 13180 defines flexible ductwork as: 'Duct which can be manually longitudinally compressed or decompressed and flexed without permanently damaging the cross section area'
Structural Fixings for Ductwork Systems BG 10/2010, By Glenn Hawkins, Published by BSRIA in 2010, lists the following types of flexible ductwork:
- Metallic, uninsulated flexible ductwork
- Metallic, insulated flexible ductwork
- Non-metallic, uninsulated flexible ductwork
- Non-metallic, insulated flexible ductwork
- Acoustic flexible ductwork
It suggests that metallic, insulated flexible ductwork is most commonly composed of:
- An inner core of aluminium and polyester laminate supported by an encapsulated high-tensile steel wire helix
- Fibreglass, mineral wool or microfibre insulation
- An outer core of aluminium and polyester laminate.
--BSRIA
[edit] Related articles on Designing Buildings
Featured articles
Check out some of the best features and news from Designing Buildings as well as key stories from around the web.
CIOB announce the winners of the Art of Building photography competition.
National Scheme of Delegation introduced.
The cost of employing people remains a concern.
Code of Practice for Electrical Energy Storage Systems.
ECA calls on members to comment on draft 4th edition.
Bringing together expertise and creating cultural benefits.
CIOB celebrates positive Ofsted report.
The Building Safety Regulator announces a call for evidence.
Government approach could undermine delivery and regeneration.
World's first mass timber data centre.
The overlooked environmental aspect of data centre development.
Introduction to radon awareness
New technical information sheet published by CIOB.
Updated supplier guide can help electrical contractors engage with NHP.
CIAT confirm the winners of the 2026 architectural technology awards.