Kappa value - thermal mass value
In the Standard Assessment Procedure (SAP) and Simplified Building Energy Model (SBEM), used to demonstrate compliance with Part L of the building regulations, k-value (short for Kappa value or thermal mass value) refers to the heat capacity per square metre of a material, measured in kJ/m2K. This is used to quantify the thermal mass of building elements such as walls and floors. The higher the k-value, the greater the thermal mass, that is the more heat the element is able to store.
Thermal mass can be used to even out variations in internal and external conditions, absorbing heat as temperatures rise and releasing it as they fall. In building design, this can useful for evening out and delaying extremes in thermal conditions, stabilising the internal environment and so reducing the demand for building services systems.
Typical K-values might be (ref the Concrete Centre SAP 2009 – Fabric energy efficiency & thermal mass):
- Timber frame wall: 9 kJ/m2K.
- Dense concrete block wall with a plaster finish: 190 kJ/m2K.
- Timber floor/ceiling: 9/18 kJ/m2K.
- Concrete floor/celing: 120/160 kJ/m2K.
The kappa value (k) of a material is calculated as:
k = 10-6 × Σ (dj rj cj) (ref BuildDesk)
where:
- dj is the thickness of a layer (mm)
- rj is density of a layer (kg/m³)
- cj is specific heat capacity of a layer (J/kg·K)
The limiting value for thickness is where:
- The total thickness of the layers exceeds 100mm.
- Or, the mid-point of the construction is reached.
- Or an insulation layer is reached.
Following the Standard Assessment Procedure, k-values are used to determine a Thermal Mass Parameter (TMP, expressed in J/m2K), which is used to calculate the contribution of thermal mass to the efficiency of the dwelling. TMP is calculated from the sum of the area x heat capacity of all construction elements, divided by total floor area of the dwelling (TFA).
NB Rather confusingly, the term k-value (sometimes referred to as a k-factor or lambda value λ) is also used to refer to the thermal conductivity of a material, that is, how easily heat passes across it. This is a fundamental property, independent of the quantity of material. It represents the steady-state heat flow through a unit area of a material resulting from a temperature gradient perpendicular to that unit area. It is expressed in W/mK.
NB see k-value for alternative meaning.
[edit] Related articles on Designing Buildings Wiki
Featured articles and news
The benefits of engaging with insulation manufacturers
When considering ground floor constructions.
Lighting Industry endorses Blueprint for Electrification
The Lighting Industry Association fully supports the ECA Blueprint as a timely, urgent call to action.
BSRIA Sentinel Clerk of Works Training Case Study
Strengthening expertise to enhance service delivery with integrated cutting-edge industry knowledge.
Impact report from the Supply Chain Sustainability School
Free sustainability skills, training and support delivered to thousands of UK companies to help cut carbon.
The Building Safety Forum at the Installershow 2025
With speakers confirmed for 24 June as part of Building Safety Week.
The UK’s largest air pollution campaign.
Future Homes Standard, now includes solar, but what else?
Will the new standard, due to in the Autumn, go far enough in terms of performance ?
BSRIA Briefing: Cleaner Air, Better tomorrow
A look back at issues relating to inside and outside air quality, discussed during the BSRIA briefing in 2023.
Restoring Abbotsford's hothouse
Bringing the writer Walter Scott's garden to life.
Reflections on the spending review with CIAT.
Retired firefighter cycles world to raise Grenfell funds
Leaving on 14 June 2025 Stephen will raise money for youth and schools through the Grenfell Foundation.
Key points for construction at a glance with industry reactions.
Functionality, visibility and sustainability
The simpler approach to specification.
Architects, architecture, buildings, and inspiration in film
The close ties between makers and the movies, with our long list of suggested viewing.
SELECT three-point plan for action issued to MSPs
Call for Scottish regulation, green skills and recognition of electrotechnical industry as part of a manifesto for Scottish Parliamentary elections.
UCEM becomes the University of the Built Environment
Major milestone in its 106-year history, follows recent merger with London School of Architecture (LSE).
Professional practical experience for Architects in training
The long process to transform the nature of education and professional practical experience in the Architecture profession following recent reports.