Simplified Building Energy Model SBEM
The National Calculation Method (NCM) describes the procedure, for buildings other than dwellings, for demonstrating compliance with the carbon emission requirements of regulation 17C of the Building Regulations and calculating 'operational ratings' and 'asset ratings' in the production of Energy Performance Certificates (EPC's).
The NCM provides the underlying method and the standard data sets necessary to calculate the annual energy use of a proposed building and comparing it with the energy use of a 'notional' building of a similar type, under similar circumstances. This is done by calculating the Target Emission Rate (TER - the CO2 emission rate for the notional building) and comparing this with the Building Emission Rate (BER) for the proposed building. The BER must not be higher than the TER.
The calculations can be performed using approved simulation software (Approved Dynamic Simulation Models (DSMs)) or by using the Simplified Building Energy Model (SBEM), a computer programme developed by BRE and available to download from the NCM website. Unlike some of the DSM's, SBEM is a 'simplified' compliance tool, rather than a design tool.
The Simplified Building Energy Model was originally based on the Dutch 'Energy Performance of Non-Residential Buildings' (NEN 2916:1998). It has been available to demonstrate compliance with Part L of the Building Regulations since 2006, and for Energy Performance Certificates since 2008.
It calculates monthly energy use and carbon dioxide emissions, given a description of the building which is entered through its user interface iSBEM, based on:
- Building type.
- Building geometry.
- Construction.
- Use.
- Heating, ventilation and air-conditioning (HVAC).
- Lighting equipment.
A design stage SBEM assessment should be completed before the construction starts, and then an as-built SBEM when construction is completed, which includes the results of an air permeability tests and demonstrates the building has been constructed in accordance with the design. This is referred to as a Building Regulation UK Part L report (BRUKL).
2013 revisions to Part L of Building Regulations, which took effect on 6 April 2014 have been implemented in a new version of SBEM, cSBEM. SBEM may still be used on projects for which transitional arrangements apply, see 2013 changes to the approved documents for part L of the building regulations for more information.
[edit] Related articles on Designing Buildings
- 2013 changes to the approved documents for part L of the building regulations.
- Approved building energy calculation software.
- Air tightness.
- Approved documents.
- Building energy simulation software.
- Building Regulations.
- Dynamic Simulation Model.
- Emission rates.
- Energy Performance Certificates.
- Energy Performance of Buildings Directive.
- ISBEM
- National Calculation Method.
- Standard Assessment Procedure.
[edit] External references
- National Calculation Method.
- National Calculation Methodology (NCM) modelling guide (for buildings other than dwellings in England and Wales) 2010 Edition.
- cSBEM.
Featured articles and news
A case study and a warning to would-be developers
Creating four dwellings for people to come home to... after half a century of doing this job, why, oh why, is it so difficult?
Reform of the fire engineering profession
Fire Engineers Advisory Panel: Authoritative Statement, reactions and next steps.
Restoration and renewal of the Palace of Westminster
A complex project of cultural significance from full decant to EMI, opportunities and a potential a way forward.
Apprenticeships and the responsibility we share
Perspectives from the CIOB President as National Apprentice Week comes to a close.
The first line of defence against rain, wind and snow.
Building Safety recap January, 2026
What we missed at the end of last year, and at the start of this...
National Apprenticeship Week 2026, 9-15 Feb
Shining a light on the positive impacts for businesses, their apprentices and the wider economy alike.
Applications and benefits of acoustic flooring
From commercial to retail.
From solid to sprung and ribbed to raised.
Strengthening industry collaboration in Hong Kong
Hong Kong Institute of Construction and The Chartered Institute of Building sign Memorandum of Understanding.
A detailed description from the experts at Cornish Lime.
IHBC planning for growth with corporate plan development
Grow with the Institute by volunteering and CP25 consultation.
Connecting ambition and action for designers and specifiers.
Electrical skills gap deepens as apprenticeship starts fall despite surging demand says ECA.
Built environment bodies deepen joint action on EDI
B.E.Inclusive initiative agree next phase of joint equity, diversity and inclusion (EDI) action plan.
Recognising culture as key to sustainable economic growth
Creative UK Provocation paper: Culture as Growth Infrastructure.
Futurebuild and UK Construction Week London Unite
Creating the UK’s Built Environment Super Event and over 25 other key partnerships.
Welsh and Scottish 2026 elections
Manifestos for the built environment for upcoming same May day elections.
Advancing BIM education with a competency framework
“We don’t need people who can just draw in 3D. We need people who can think in data.”