Electricity bill
An electricity bill, in the context of buildings and their owners and/or occupants, is effectively an invoice detailing money that is owed for electrical energy that has been used.
In its simplest form, electrical energy will have been metered, usually in terms of the quantity of kilowatt hours that have a been used in a given time period.
A kilowatt hour or ‘Kwh’ is the quantity of energy that a load of 1Kw uses in 1 hour.
So:
1Kw running for 1 hour = 1Kwh
Equally:
0.5 Kw (500w) running for 2 hours = 1Kwh
And
2kW running for 30 minutes also = 1Kwh
1Kwh is also known as ‘1 unit of electricity’
The company supplying the energy will have set the price for the unit of electricity. This and other details that make up the bill will be detailed in the supplier’s terms and conditions. Such terms and conditions are known as tariffs.
Tariffs will vary widely between suppliers. As well as detailing the cost per unit of electricity, these will also cover other costs that make up the total amount owed.
In its most simple form, the bill will set out payment terms, such as payment due date, VAT rate if applicable and methods by which payment may be made.
On larger installations, it is common to see much more detailed tariffs, which may often encourage electricity saving at peak times and variable unit rates for different times of day.
With more complex tariffs, electricity usage will be charged while taking into account other factors such as:
- Time of day.
- Maximum demand at any given point in time.
- Seasonal variations.
- Power factor that electricity has been taken at.
- System usage charges.
- Payment methods.
The electricity bill must clearly set out all this information so that it is easy to establish how the total amount charged has been calculated.
NB Making Mission Possible - Delivering A Net-Zero Economy, published by the Energy Transitions Commission (ETC) in September 2020, suggests that the levelised cost of electricity (LCOE) is: ‘A measure of the average net present cost of electricity generation for a generating plant over its lifetime. The LCOE is calculated as the ratio between all the discounted costs over the lifetime of an electricity-generating plant divided by a discounted sum of the actual energy amounts delivered.’
--ECA
[edit] Related articles on Designing Buildings
- Articles about electricity.
- Consumer electronics.
- Consumer unit.
- ECA calls on Government to reform and rebalance energy levies and avoid cost of living crisis.
- Electrical appliance.
- Electrical consumption.
- Electrical energy.
- Electrical equipment.
- Electrical installation.
- Electrical power.
- Electrical safety.
- Energy cost.
- Energy price crisis: ECA calls for energy levy reform.
- Energy tariffs.
Featured articles and news
The UK’s largest air pollution campaign.
Future Homes Standard, now includes solar, but what else?
Will the new standard, due to in the Autumn, go far enough in terms of performance ?
BSRIA Briefing: Cleaner Air, Better tomorrow
A look back at issues relating to inside and outside air quality, discussed during the BSRIA briefing in 2023.
Restoring Abbotsford's hothouse
Bringing the writer Walter Scott's garden to life.
Reflections on the spending review with CIAT.
Retired firefighter cycles world to raise Grenfell funds
Leaving on 14 June 2025 Stephen will raise money for youth and schools through the Grenfell Foundation.
Key points for construction at a glance with industry reactions.
Functionality, visibility and sustainability
The simpler approach to specification.
Architects, architecture, buildings, and inspiration in film
The close ties between makers and the movies, with our long list of suggested viewing.
SELECT three-point plan for action issued to MSPs
Call for Scottish regulation, green skills and recognition of electrotechnical industry as part of a manifesto for Scottish Parliamentary elections.
UCEM becomes the University of the Built Environment
Major milestone in its 106-year history, follows recent merger with London School of Architecture (LSE).
Professional practical experience for Architects in training
The long process to transform the nature of education and professional practical experience in the Architecture profession following recent reports.
A people-first approach to retrofit
Moving away from the destructive paradigm of fabric-first.
International Electrician Day, 10 June 2025
Celebrating the role of electrical engineers from André-Marie Amperè, today and for the future.
New guide for clients launched at Houses of Parliament
'There has never been a more important time for clients to step up and ...ask the right questions'
The impact of recycled slate tiles
Innovation across the decades.
EPC changes for existing buildings
Changes and their context as the new RdSAP methodology comes into use from 15 June.