Ampere
An ampere (A), also known as ‘amp’, is a unit of electrical current equal to the flow of one coulomb per second. It is named after Andre-Marie Ampere who is widely regarded as the leading pioneer of electrodynamics.
The International System of Units (SI) defines the ampere as the unit that is used to measure electric current; current being a count of the number of electrons flowing through a circuit.
One amp is the amount of current produced by a one volt acting through a resistance of one ohm.
Measuring amperes is important when working with electrical systems as a means of ensuring that the wires are not handling a higher current than they are rated for, and therefore risking faults or failure.
Amperes can be measured using a digital multimeter, but since models differ according to the amount of current they can measure, care should be taken to make sure a device with the correct rating is used.
Ampere’s force law states that there is an attractive or repulsive force between two parallel wires that carry an electric current.
[edit] Related articles on Designing Buildings Wiki
Featured articles and news
Creativity, conservation and craft at Barley Studio. Book review.
The challenge as PFI agreements come to an end
How construction deals with inherit assets built under long-term contracts.
Skills plan for engineering and building services
Comprehensive industry report highlights persistent skills challenges across the sector.
Choosing the right design team for a D&B Contract
An architect explains the nature and needs of working within this common procurement route.
Statement from the Interim Chief Construction Advisor
Thouria Istephan; Architect and inquiry panel member outlines ongoing work, priorities and next steps.
The 2025 draft NPPF in brief with indicative responses
Local verses National and suitable verses sustainable: Consultation open for just over one week.
Increased vigilance on VAT Domestic Reverse Charge
HMRC bearing down with increasing force on construction consultant says.
Call for greater recognition of professional standards
Chartered bodies representing more than 1.5 million individuals have written to the UK Government.
Cutting carbon, cost and risk in estate management
Lessons from Cardiff Met’s “Halve the Half” initiative.
Inspiring the next generation to fulfil an electrified future
Technical Manager at ECA on the importance of engagement between industry and education.
Repairing historic stone and slate roofs
The need for a code of practice and technical advice note.
Environmental compliance; a checklist for 2026
Legislative changes, policy shifts, phased rollouts, and compliance updates to be aware of.