Accredited construction details ACDs
Accredited construction details (ACDs) are a set of standardised junction details developed in 2002 that can be followed to ‘design out’ thermal bridges in compliance with the energy efficiency requirements (Part L) of the Building Regulations.
A thermal bridge (sometimes referred to as a cold bridge or thermal bypass) describes a situation in which there is a direct connection between the inside and outside of a building through one or more elements that are more thermally conductive than the rest of the building envelope. As a result, there can be wasteful heat transfer across those elements, and the internal surface temperature will be different from other, better insulated internal surfaces which can result in condensation.
The ACDs provide a description of how to construct standard details. They focus on insulation continuity and air tightness and provide checklists which can be used by designers, constructors and building control bodies to ensure provision has been made to eliminate all reasonably avoidable thermal bridges.
While they have primarily been developed in relation to the construction, alteration and extension of dwellings, they may also be valid for buildings other than dwellings where the construction details are similar.
The details are grouped by generic construction type:
- Steel frame details;
- Timber frame details;
- Masonry cavity wall insulation details;
- Internal walls, and
- Masonry external wall insulation details.
The ACDs have now been archived, and their status is not clear, however, they are still available to download from the national archive.
Further accredited details are available for Scotland 2015 and Northern Ireland 2015.
NB Part L 2021 Where to start, A guide for housebuilders and their advisors, Masonry construction, published by the Future Homes Hub in June 2022, states: ‘Typical construction details which were published in 2007 by the Department for Communities and Local Government to address issues with continuity of thermal and airtightness layers in construction. While ACDs are largely out of date, they have not been withdrawn and are still available for use.’
[edit] Related articles on Designing Buildings
Featured articles and news
The 5 elements of seiri, seiton, seiso, seiketsu and shitsuke.
Shading for housing, a design guide
A look back at embedding a new culture of shading.
The Architectural Technology Awards
The AT Awards 2025 are open for entries!
ECA Blueprint for Electrification
The 'mosaic of interconnected challenges' and how to deliver the UK’s Transition to Clean Power.
Grenfell Tower Principal Contractor Award notice
Tower repair and maintenance contractor announced as demolition contractor.
Passivhaus social homes benefit from heat pump service
Sixteen new homes designed and built to achieve Passivhaus constructed in Dumfries & Galloway.
CABE Publishes Results of 2025 Building Control Survey
Concern over lack of understanding of how roles have changed since the introduction of the BSA 2022.
British Architectural Sculpture 1851-1951
A rich heritage of decorative and figurative sculpture. Book review.
A programme to tackle the lack of diversity.
Independent Building Control review panel
Five members of the newly established, Grenfell Tower Inquiry recommended, panel appointed.
Welsh Recharging Electrical Skills Charter progresses
ECA progressing on the ‘asks’ of the Recharging Electrical Skills Charter at the Senedd in Wales.
A brief history from 1890s to 2020s.
CIOB and CORBON combine forces
To elevate professional standards in Nigeria’s construction industry.
Amendment to the GB Energy Bill welcomed by ECA
Move prevents nationally-owned energy company from investing in solar panels produced by modern slavery.
Gregor Harvie argues that AI is state-sanctioned theft of IP.
Experimental AI housing target help for councils
Experimental AI could help councils meet housing targets by digitising records.
BSRIA Occupant Wellbeing survey BOW
Occupant satisfaction and wellbeing tool inc. physical environment, indoor facilities, functionality and accessibility.