Door terminology
The terminology used to describe the components making up a door and its surroundings can be complex and confusing.
Contents |
[edit] Lintel
The lintel is the structural member at the top of an opening such as a door opening (sometimes referred to as a doorway) that transfers the load from the structure above to the side walls of the opening.
[edit] Casings, linings and frames
These sit within the structural opening (or doorway), forming the frame within which the door will be fixed.
Generally door frames are used for external doors and door linings or casings for internal doors.
Door casings are supplied with an integral door stop, whereas door linings have a ‘loose’ door stop that has to be fixed to the lining.
Casings and linings can be trenched, meaning that the top rail has a slot in it into which the side rails fit. Typically trenched linings or casings are used for standard door sizes, whereas untrenched linings or casings may be used for non-standard sizes and old doors where some flexibility is required.
[edit] Mouldings, architraves and surrounds
Generally, profiled mouldings are used to conceal the joint between the wall construction and the casing, lining or frame. The mouldings can be plain or highly decorative.
Door surrounds include both top and side mouldings, perhaps designed with features at the centre and at corners to give an overall decorative effect.
In its proper use, an architrave is a top moulding where the moulding extends across the top of the side mouldings. However, in the modern construction industry, the term architrave it is frequently used to refer to any horizontal or vertical mouldings that form the surround to a door.
[edit] Ironmongery hardware and furniture
There are a range of additional components and accessories that can be added to door constructions to enable their proper operation, such as hinges, knockers, hooks, bolts, stops, finger plates, kick plates, letterboxes, closers and so on.
These components are generally referred to as ‘door furniture’. Where they are made of metal, they may be referred to as ‘ironmongery’.
The term ‘hardware’ is sometimes used more specifically to refer to door handles and knobs.
[edit] Related articles on Designing Buildings
Featured articles and news
Getting the most out of heat pumps and heating
How heat pumps work and how they work best.
Plumbing and heating for successful retrofit and renovation
Low temperature underfloor systems and heat pumps.
Cost-of-living crisis and home improvement plans
Starting on the right footing and top tips for projects.
Delays on construction projects
Types, mitigation and the acceleration of works.
From Chaucer to Fawlty Towers.
Electrotechnical excellence, now open for entries.
Net zero electricity grids BSRIA guide NZG 5/2024
Outlining the changes needed to transition to net zero.
CIOB Global Student Challenge 2024
Universitas Indonesia wins for second year running.
New project and cultural district described in detail.
The nature of EPCs, crticism and inaccuracies.
History, issues and redesign.
From waste recycling to energy performance the hierchy.
An introduction to WERCS and WEEE responsibilities
Dealing with 2 million tonnes of waste equipment a year.
Global BACS Market: analytics and optimisation
A BSRIA glance at building automation and control systems.
What it is and how to use it.
Types of insulating plaster by binder and insulant.
Investors in People: CIOB achieves gold
Reflecting a commitment to employees and members.
Scratching beneath the surface; a guide to selection.
ECA 2024 Apprentice of the Year Award
Entries open for submission until May 31.
UK gov apprenticeship funding from April 2024
Brief summary the policy paper updated in March.
Comments