- Project plans
- Project activities
- Legislation and standards
- Industry context
Last edited 03 Apr 2017
Building wraps are large-scale printed sheet materials that can be fixed to scaffolding structures and used to conceal building work. They are commonly digitally printed with a CGI rendering or photographic image of the building façade, attempting in some way to ‘blend in’ better with its context than traditional debris netting would.
It is a technique that is sometimes used on important buildings, or in sensitive locations, to hide unsightly scaffolding while providing a tantalising representation of what the building looks, or will look, like.
The benefits of building wraps are that they can help to reduce the spread of dust and other debris, conceal construction work from the public, and mean that views of the under-construction building is minimised.
The scaffolding must be securely erected for the building wrap to be installed. If necessary, engineers must calculate wind loading to be ensure that the installation of the wrap will not be a hazard to the scaffolding.
Building wraps are typically installed onto a 'picture frame' scaffold structure which projects about 300 mm further out than the last projected pole on the main scaffolding. Any projecting scaffold poles should be capped to cover sharp ends. This allows the wrap banner to move with the wind without getting caught on any poles which can cause damage.
Two commonly used fixing methods are standard and invisible:
- The standard method involves a picture frame that is made up of perimeter scaffolding with the wrap banner sitting about 150 mm inside the frame, fixed using 12 mm bungee cable (so th scaffold is visible).
- The invisible method is more difficult but is generally thought to give a better appearance. The wrap banner is pulled completely smooth, placed over the outside of the picture frame scaffolding and clamped using clamp couplers/joins.
Typically, the scaffolding picture frame is installed before printing the wrap, so that an accurately measured template can be provided to the designers. This ensures that the wrap covers the scaffold completely, that it is taut enough and does not crease.
 Related articles on Designing Buildings Wiki
Featured articles and news
A document can be called a bond or a guarantee. Does the name matter and what is the difference between them?
New briefing note is launched focusing on increasing knowledge of housing that promotes health and wellbeing.
Arbitration is a private, contractual form of dispute resolution used in the construction industry.
The European Parliament has approved a revised Energy Performance of Buildings directive.
One in six MPs supports the ring-fencing of retentions as proposed in the 'Aldous Bill'.
A stakeholder is anyone who has an interest in the process or outcome of a construction project.
BRE launches online self-assessment tool for ethical labour sourcing.
Tower refurbishment failed to meet safety standards on several counts, according to leaked report.
It may seem obvious but what does the term 'structure' refer to within a built environment context?
Carillion's liabilities could be much higher than previously thought, according to Receiver.
Photographing Historic Buildings, by the former head of photography at English Heritage.