Mesh mould metal
Since 2015, the Zurich-based research group Gramazio Kohler Research has been developing ‘mesh mould metal’. This is a project studying the unification of concrete reinforcement and formwork into a single, robotically-fabricated material system.
The first (2012-14) phase of research, ‘Mesh mould’, addressed the 1:1 construction aspects of robotically-fabricated load-bearing structures, and a robotic extrusion process for a polymer mesh.
The second phase, ‘Mesh mould metal’, has focused on the transition of the structurally-weak polymer-based extrusion process into a fully load-bearing construction system, by replicating the process in metal.
The research involves the development of ‘a fully automated bending and welding process for meshes fabricated from 3 mm steel wire.’
Standard industrial robots have limited payload capacities yet have a high capacity for precise spatial coordination. Therefore, their optimal use requires construction processes with minimal mass transfer and a high degree of geometric definition. Subsequently, the focus of the investigation was fabrication with material efficiency in mind, with geometrically complex concrete elements.
The project was conducted in collaboration with Sika Technology AG. Mesh Mould is also embedded into the National Competence Centre in Research (NCCR) Digital Fabrication, and funded by the Swiss National Science Foundation.
Images copyright Gramazio Kohler Research, ETH Zurich.
Content and images courtesy of GKR. For more information, see GKR.
[edit] Related articles on Designing Buildings Wiki
Featured articles and news
Electrotechnical excellence, now open for entries.
Net zero electricity grids BSRIA guide NZG 5/2024
Outlining the changes needed to transition to net zero.
CIOB Global Student Challenge 2024
Universitas Indonesia wins for second year running.
New project and cultural district described in detail.
The nature of EPCs, crticism and inaccuracies.
History, issues and redesign.
From waste recycling to energy performance the hierchy.
An introduction to WERCS and WEEE responsibilities
Dealing with 2 million tonnes of waste equipment a year.
Global BACS Market: analytics and optimisation
A BSRIA glance at building automation and control systems.
What it is and how to use it.
Types of insulating plaster by binder and insulant.
Investors in People: CIOB achieves gold
Reflecting a commitment to employees and members.
Scratching beneath the surface; a guide to selection.
ECA 2024 Apprentice of the Year Award
Entries open for submission until May 31.
UK gov apprenticeship funding from April 2024
Brief summary the policy paper updated in March.
For the World Autism Awareness Month of April.