Mastic asphalt flooring
Terrazzo mastic asphalt flooring by IKO PLC. Photo credit: Mastic Asphalt Council.
Contents |
[edit] Introduction
The term ‘flooring’ refers to the lower enclosing surface of spaces within buildings. This may be part of the floor structure, such as the upper surface of a concrete slab or floor boards, but typically it is a permanent covering laid over the floor. There are many types of flooring materials available. For more information see Types of flooring.
[edit] Flooring materials
Resilient flooring is loosely defined as flooring manufactured from elastic materials. Products made out of these materials share certain characteristics - they are durable and firm, but they also offer a degree of 'bounce' or resilience. For more information see Resilient flooring.
Mastic asphalt was introduced in the 1900s and became widely used as a type of resilient flooring up until the 1950s. It has experienced an increase in popularity due to useful characteristics inherent in its composition, application and durability.
[edit] Composition
Mastic asphalt is a mixture of fine and coarse limestone and dolomite aggregate and synthetic bitumens. Some grades may also contain natural asphalts, polymer modified bitumens and pigments to create different design effects (such as terrazzo) and colours.
None of the components are classified as hazardous in accordance with the CLP Regulation (EC) no 1272/2008.
Terrazzo mastic asphalt flooring. Photo credit: Mastic Asphalt Council.
[edit] Application
To apply mastic asphalt, the mixture is poured while still hot so it can be distributed evenly. It is then smoothed and left to cool and cure, which takes approximately two to three hours (depending on the temperature in the surrounding environment). This can be an advantage in situations where speed is required.
The thickness of the layer of mastic asphalt can vary, but it typically ranges from 15mm to 50mm, depending on various factors and requirements of the application.
[edit] Durability
While mastic asphalt flooring is not common compared to other types of flooring, it does have advantages in both commercial (in particular industrial, education and healthcare) and domestic applications, especially when water protection is a priority. Due to its water resistant nature, mastic asphalt flooring can be used as a protective layer under carpet, wood and other types of flooring.
In laboratories or manufacturing environments where chemicals and acids (other than solvents) are present and spark resistance is a factor (it has a non-flammable classification of Bfl-s1, under to EN 13501-1) mastic asphalt can also be a suitable flooring option. Warehouses and shop floors that experience regular traffic from equipment such as forklifts and pneumatic trolleys are suitable for mastic flooring.
However, if the surface will have to support heavy, permanent equipment, a mastic asphalt floor may become misshapen from the weight of the load. Therefore, it is important to select Type F1076 mastic asphalt for flooring that is graded according to usage, as follows:
- Grade I - Special hard flooring.
- Grade II - Light duty flooring.
- Grade III - Medium duty flooring.
- Grade IV - Heavy duty flooring.
[edit] Related articles on Designing Buildings Wiki
Featured articles and news
UK Construction Week, London is here !
Debuting major international pavilions and much more.
Getting the most out of heat pumps and heating
How heat pumps work and how they work best.
Plumbing and heating for successful retrofit and renovation
Low temperature underfloor systems and heat pumps.
Cost-of-living crisis and home improvement plans
Starting on the right footing and top tips for projects.
Delays on construction projects
Types, mitigation and the acceleration of works.
From Chaucer to Fawlty Towers.
Electrotechnical excellence, now open for entries.
Net zero electricity grids BSRIA guide NZG 5/2024
Outlining the changes needed to transition to net zero.
CIOB Global Student Challenge 2024
Universitas Indonesia wins for second year running.
New project and cultural district described in detail.
The nature of EPCs, crticism and inaccuracies.
History, issues and redesign.
From waste recycling to energy performance the hierchy.
ECA 2024 Apprentice of the Year Award
Entries open for submission until May 31.
UK gov apprenticeship funding from April 2024
Brief summary the policy paper updated in March.