Cordwood
Cordwood is a term used to describe a pile of wood that is cut into lengths of a similar size and stacked in a single row. The term can describe wood that has been stacked as a storage method for firewood, but it can also be used to describe a stack of wood used to construct a wall, often with lime mortar in between and sometimes referred to as a stackwall.
In the US, more specifically, a full cord of wood is a stack of timber firewood lengths that is 4 feet tall, 8 feet long, and 4 feet deep (1.2 by 2.4 by 1.2 metres deep). Face chord describes the same surface area of a wood stack but where the depth of the wood is only 16 inches, about a third of a full chord or less than half a metre in depth.
Cordwood construction is a construction method that uses end-grain logs of varying lengths stacked to form walls, usually with mortar in between. In his book Essential Cordwood Building: The complete step-by-step guide (New Society Publishers, 2018; Gabriola Island, Canada), Rob Roy suggests a common mix by volume to be sand (9 parts), sawdust, and non-agricultural lime (3 parts each) with Portland cement (2 parts). As the timbers are end grain, they are likely to dry and move. The suggested mix takes some time to cure, allowing for some movement.
The origins of cordwood are unclear, but structures around 1000 years old existing in Germany and other countries such as Sweden and Canada also have some tradition of employing this method. It has some advantages because it can make effective use of off-cuts and end logs, not requiring the longer timbers usually needed for framing and log construction. It is also a relatively simple and cost-effective vernacular construction method, making it popular with self-builders, and as walls often contain high quantities of mortar, it has increased thermal as well as some insulative properties. As the timbers are laid with the end grain exposed externally, the thermal properties are decreased, though this can be countered by the depth of the timbers that are used, as well as the introduction of vermiculate into the mortar mix and the potential for cavity wall construction or two layers.
While it remains not a particularly common construction method, its use of potential waste end-grain wood material from logging makes it very cost-effective. It is still an approach that is used today in many different countries. The image above is described as; a built section of cordwood masonry wall. Cut log ends protrude slightly from the pointed mortar join. Earthwood Building School, 2016. (source: cordwoodmasonry.com Author Trajinus under CC license).
[edit] Related articles on Designing Buildings
- Cement mortar.
- Deforestation.
- Dry hydrate lime mortar.
- Forests.
- Grout.
- Hot-mixed lime mortar.
- Hemp lime construction: A guide to building with hemp lime composites.
- Hydraulic lime.
- Lime putty mortar.
- Lime run-off.
- Mortar.
- Mortar analysis for specifiers.
- Pointing.
- Portland cement.
- Sustainable timber.
- Sweet chestnut
- Timber species
- Types of rapidly renewable content
- The history of timber construction in the UK.
- Types of rapidly renewable content
- Types of mortar.
Featured articles and news
Permitted development rights for agricultural buildings
The changes coming into effect as of May 21, 2024.
Biodiversity and the built environment digital series
The nature of building, with CIOB and CWP.
A call for prevention and sensitive re-use.
Risks to the long-term effectiveness of the BNG scheme
National Audit Office publish review of Biodiversity Net Gain.
The CIAT principal designer register
Providing assurance and verification of the capability and competence of registered ATs.
Building Safety recommendations and Northern Ireland
The NI roadmap to improving safety in high rise residential.
Specifying rendered external wall insulation for fire safety
How to interrogate the evidence provided to the specifier.
The benefits of writing articles for your organisation
How to create a profile for your organisation and publish for free.
No Falls Week. The importance of safe working at height
What to expect and what is on offer to avoid accidents.
Scottish Government action to reach net-zero targets
Retrofit expert group highlight critical actions needed.
A forward thinking, inclusive global community of members.
From engineered product life-spans, to their extension.
Circular economy in the built environment
A brief description from 2021. Where are we now?
CLC publishes domestic retrofit competency framework
Roadmap of Skills for net zero.
Understanding is key to conservation.
Open industry engagement survey seeks responses
Institutions and the importance of engagement.