Caulk
Caulk is filler material commonly used by decorators. Most caulks are more rigid than sealants, but more flexible than other fillers when they dry and can be used where movement or leakage can occur - as long as significant expansion or contraction is not anticipated.
Historically, caulk was made from fibrous materials that could be driven between boards, pipes and so on to make them waterproof. Rope caulks are still available and are primarily used to reduce drafts, and sound transmission, especially around windows.
Modern caulk is also waterproof. It is typically made from acrylics, vinyl or silicone. These materials dry quickly and remain relatively flexible. It can be used to close small gaps and crevices. It prevents air, insects, rodents and dust from compromising the integrity of seals, spaces and structures.
Acrylic caulk can be painted after it has dried completely. However, painted caulk can crack if it is applied in temperatures lower than four degrees Celsius. Silicone caulk cannot be painted.
Caulk is generally sold in cartridges that can be inserted into caulking guns. This technique helps to control the application process. If spills and smears occur during the process, they can be cleaned up with water rather than solvents.
It is possible to caulk over old acrylic caulk, unless the old caulk is oily, dirty or has deteriorated significantly (in which case, the new caulk will not adhere). Caulk should not be applied over old caulk that is wet or has mould or mildew.
[edit] Related articles on Designing Buildings
Featured articles
Check out some of the best features and news from Designing Buildings as well as key stories from around the web.
Bridging the gap between clients and contractors
Concerns remain around contractor quality, capability, and delivery.
Construction Management, 10 June.
Heat pumps beat boilers in new home tests.
Building Safety Act implementation in Wales
CIAT to host industry panel on 26 June.
New and updated CLC building safety guidance.
New UK National Buildings Database.
Building Safety Wiki Interviews
Chief executive of the British Woodworking Federation.
Planning condition discharge in England and Wales
A brief explanation from a building compliance expert, with further links.
Overheating guidance and tools for building designers
Guidance for dealing with element of building fabric control that have increasing importance.
Shading for housing, a design guide
From the Good Homes Alliance and British Blind and Shutter Association.
UK Standard Skills Classification (SSC)
A shared framework for describing skills needs.
Social media ban consultation comes to close
CIOB urges UK Government to consider social media’s role in careers guidance in ban debate.

















Comments
[edit] To make a comment about this article, click 'Add a comment' above. Separate your comments from any existing comments by inserting a horizontal line.