Single-layer particle board
Single-layer particle board is essentially standard particle board, where the size of the particles and the density at which they are pressed and glued is the same throughout the thickness of the board. Essentially the definition of single layer particle board came about with the introduction of and to make a distinction from three-layer particle board where particles are more tightly packed and denser on the outer edges. Other related terms for similar products are chipboard and fibre board, though the detail in processing can vary.
Particleboard was originally formulated in late 19th century Germany, the produced commercially around the Second World War. The earlier board products were often made using blood albumin glue, whilst later commercial products used phenolic resins, amino formaldehyde-, urea formaldehyde-, or urea melamine-based, today there are also particle board products that use glues with lesser environmental impacts.
All particle boards comprise of a small chips and flakes of softwood of varying sizes and density that are impregnated with adhesive (usually amino formaldehyde-, urea formaldehyde-, or urea melamine-based) and subjected to high temperature (up to 220°C) and pressure (2-4MP). When cooled, the boards are cut and sanded, sold either as plain board or faced with laminate.
The density of single-layer particle boards tends to vary between around 600 kg/m3 to 800 kg/m3, the significant characterisation is that this density is the same throughout the board, unlike three-layer particle board.
Single-layer particle boards can show greater uniformity, that the natural grains of other solid timber products with more regular movement issues. Due to the use of dried wood chips it can be a more stable material than solid timber under warm conditions, though can be affected by atmospheric changes and, when damp, is likely to swell and discolour. The product can be sealed though not usually used for external applications. Single-layer particle board being consistent throughout can also be used to describe boards containing other minerals such as cement-bonded particle board, where density and make-up is constant through the board.
Normal hand or machine tools can be used for working particleboard , it usually take screws but make crack in patches if screws are over stressed, denser grades can provide greater strength and resistance to screw failure, as can three layer particle boards where the outer edges are denser than the middle core.
[edit] Related articles on Designing Buildings
- Adhesives.
- Blockboard.
- Cedar.
- Chipboard.
- Confederation of Timber Industries.
- Cross-laminated timber.
- Engineered bamboo.
- Glulam.
- Hardboard.
- Laminated veneer lumber LVL.
- Lime wood.
- Low-density fibreboard LDF.
- Medium density fibreboard - MDF.
- Modified wood.
- Oriented strand board.
- Particle board.
- Plywood.
- Softwood.
- Timber.
- Timber construction for London.
- Timber preservation.
- Timber vs wood.
- Types of timber.
Featured articles and news
Deputy editor of AT, Tim Fraser, discusses the newly formed society with its current chair, Chris Halligan MCIAT.
Barratt Lo-E passivhaus standard homes planned enmasse
With an initial 728 Lo-E homes across two sites and many more planned for the future.
Government urged to uphold Warm Homes commitment
ECA and industry bodies write to Government concerning its 13.2 billion Warm Homes manifesto commitment.
Places of Worship in Britain and Ireland, 1929-1990. Book review.
The emancipation of women in art.
CIOB Construction Manager of the Year 2025
Just one of the winners at the CIOB Awards 2025.
Call for independent National Grenfell oversight mechanism
MHCLG share findings of Building Safety Inquiry in letter to Secretary of State and Minister for Building Safety.
The Architectural Technology Awards
AT Awards now open for this the sixth decade of CIAT.
50th Golden anniversary ECA Edmundson awards
Deadline for submissions Friday 30 May 2025.
The benefits of precast, off-site foundation systems
Top ten benefits of this notable innovation.
Encouraging individuals to take action saving water at home, work, and in their communities.
Takes a community to support mental health and wellbeing
The why of becoming a Mental Health Instructor explained.
Mental health awareness week 13-18 May
The theme is communities, they can provide a sense of belonging, safety, support in hard times, and a sense purpose.
Mental health support on the rise but workers still struggling
CIOB Understanding Mental Health in the Built Environment 2025 shows.
Design and construction material libraries
Material, sample, product or detail libraries a key component of any architectural design practice.
Construction Products Reform Green Paper and Consultation
Still time to respond as consultation closes on 21 May 2025.
Resilient façade systems for smog reduction in Shanghai
A technical approach using computer simulation and analysis of solar radiation, wind patterns, and ventilation.