Laitence
Laitence is 'a milky layer of lime or cement on the surface of the mortar, the result of using too much water in the mix, overworking the mortar or rapid drying.'
As defined by the Society for the Protection of Ancient Buildings (SPAB) from their online Glossary. Hemp lime construction: A guide to building with hemp lime composites.
[edit] Related articles on Designing Buildings
- High lime low alkali glass.
- Hot-mixed mortars: the new lime revival.
- Hydraulic lime.
- Hydrated lime.
- Lime concrete.
- Lime mortar.
- Lime plaster.
- Lime run-off.
- Mortar.
- Natural hydraulic lime.
- Non hydraulic lime.
- Portland cement.
- Putty lime.
- Sand.
- Soda-lime glass.
- The use of lime mortar in building conservation.
Featured articles
Check out some of the best features and news from Designing Buildings as well as key stories from around the web.
The adaptive reuse of large industrial structures.
Promoting the circular economy by extending the life of buildings.
CIAT responds to Climate Change Committee report
An urgent wake-up call for both government and the built environment.
Construction Management, 24 June
FMB pilot aims to build pipeline of site-ready tradespeople.
A quick introduction.
CLC publishes Mental Health Joint Code of Practice.
A quick introduction to its uses and risks.
Construction Management, 17 June
Government rolls out digital planning tool to all local authorities.
Your views needed - a strategy for the professions, trades and occupations.
Confronting competency, codes, capacity and costs.
The hidden risk in modern construction supply chains.
Construction Management, 10 June
24 months to 14: CITB launches accelerated apprenticeships.