Gas springs
Gas springs are complex creations, and it is vital that those who make use of them understand both how they actually work, and how they can meet the needs of a variety of operations. Unlike a traditional metal spring, a gas spring makes use of compressed gas to achieve the required force.
The gas within these springs is often introduced through a Schrader type valve. This is a valve that consists of a brass tube that is threaded on the exterior, with a metal pin that is located flush along the axis of the tube and the valve body. The valve generally makes use of a lip seal around the rod, and the gas is forcefully injected through the tube, using either external high pressures or a mechanical gasket that is known as an O-ring system. Usually contained within a cylinder, this gas is compressed by a piston when any dynamic effect is required.
In gas springs, where the interior plunger also possesses a diaphragm that is sufficient to extend to the edge of its housing tube, the spring will become immobile once it is subjected to a consistent force. This results in the spring being able to support a weight in the manner of a more traditional spring.
Slow dampened springs exploit a small hole in this plunger which allows them to be used on heavy windows and doors, whilst quick gas springs are modified for faster operations such as air guns.
When the gas volume is decreased, the internal pressure of the tube is reduced by either an end stop or a sliding mechanism. This, in turn, allows the properties of a gas spring to be adjusted even when it is in use.
Particularly powerful gas springs can actually be used as a power pack (a unit for converting a power supply), as the high levels of pressure they contain can be translated into usable energy. In emergencies, this gas can also be introduced through a gas generator cell, in a similar manner to those used in airbags.
These springs are ideal for controlled movement without the addition of extra energy. As a safety precaution, these springs contain nitrogen gas because nitrogen cannot explode and is non-toxic. However, because these springs have high pressure, they should not be opened unless instructed by an expert.
These springs are used in a wide range of applications including hatches, car hatches and bonnets, chairs, beds and windows.
--European Springs and Pressings Ltd
[edit] Related articles on Designing Buildings Wiki
Featured articles and news
Skills England publishes Sector skills needs assessments
Priority areas relating to the built environment highlighted and described in brief.
BSRIA HVAC Market Watch - May 2025 Edition
Heat Pump Market Outlook: Policy, Performance & Refrigerant Trends for 2025–2028.
Committing to EDI in construction with CIOB
Built Environment professional bodies deepen commitment to EDI with two new signatories: CIAT and CICES.
Government Grenfell progress report at a glance
Line by line recomendation overview, with links to more details.
An engaging and lively review of his professional life.
Sustainable heating for listed buildings
A problem that needs to be approached intelligently.
50th Golden anniversary ECA Edmundson apprentice award
Deadline for entries has been extended to Friday 27 June, so don't miss out!
CIAT at the London Festival of Architecture
Designing for Everyone: Breaking Barriers in Inclusive Architecture.
Mixed reactions to apprenticeship and skills reform 2025
A 'welcome shift' for some and a 'backwards step' for others.
Licensing construction in the UK
As the latest report and proposal to licence builders reaches Parliament.
Building Safety Alliance golden thread guidance
Extensive excel checklist of information with guidance document freely accessible.
Fair Payment Code and other payment initiatives
For fair and late payments, need to work together to add value.
Pre-planning delivery programmes and delay penalties
Proposed for housebuilders in government reform: Speeding Up Build Out.
High street health: converting a building for healthcare uses
The benefits of health centres acting as new anchor sites in the high street.
The Remarkable Pinwill Sisters: from ‘lady woodcarvers’ to professionals. Book review.
Skills gap and investment returns on apprenticeships
ECA welcomes new reports from JTL Training and The Electrotechnical Skills Partnership.
Committee report criticises UK retrofit schemes
CIOB responds to UK’s Energy Security and Net Zero Committee report.