Single-layer particle board
Single-layer particle board is essentially standard particle board, where the size of the particles and the density at which they are pressed and glued is the same throughout the thickness of the board. Essentially the definition of single layer particle board came about with the introduction of and to make a distinction from three-layer particle board where particles are more tightly packed and denser on the outer edges. Other related terms for similar products are chipboard and fibre board, though the detail in processing can vary.
Particleboard was originally formulated in late 19th century Germany, the produced commercially around the Second World War. The earlier board products were often made using blood albumin glue, whilst later commercial products used phenolic resins, amino formaldehyde-, urea formaldehyde-, or urea melamine-based, today there are also particle board products that use glues with lesser environmental impacts.
All particle boards comprise of a small chips and flakes of softwood of varying sizes and density that are impregnated with adhesive (usually amino formaldehyde-, urea formaldehyde-, or urea melamine-based) and subjected to high temperature (up to 220°C) and pressure (2-4MP). When cooled, the boards are cut and sanded, sold either as plain board or faced with laminate.
The density of single-layer particle boards tends to vary between around 600 kg/m3 to 800 kg/m3, the significant characterisation is that this density is the same throughout the board, unlike three-layer particle board.
Single-layer particle boards can show greater uniformity, that the natural grains of other solid timber products with more regular movement issues. Due to the use of dried wood chips it can be a more stable material than solid timber under warm conditions, though can be affected by atmospheric changes and, when damp, is likely to swell and discolour. The product can be sealed though not usually used for external applications. Single-layer particle board being consistent throughout can also be used to describe boards containing other minerals such as cement-bonded particle board, where density and make-up is constant through the board.
Normal hand or machine tools can be used for working particleboard , it usually take screws but make crack in patches if screws are over stressed, denser grades can provide greater strength and resistance to screw failure, as can three layer particle boards where the outer edges are denser than the middle core.
[edit] Related articles on Designing Buildings
- Adhesives.
- Blockboard.
- Cedar.
- Chipboard.
- Confederation of Timber Industries.
- Cross-laminated timber.
- Engineered bamboo.
- Glulam.
- Hardboard.
- Laminated veneer lumber LVL.
- Lime wood.
- Low-density fibreboard LDF.
- Medium density fibreboard - MDF.
- Modified wood.
- Oriented strand board.
- Particle board.
- Plywood.
- Softwood.
- Timber.
- Timber construction for London.
- Timber preservation.
- Timber vs wood.
- Types of timber.
Featured articles and news
The construction industry ramps up for the general election
Election manifestos, charters, campaigns and comments.
Collaboration benefits of real-time file synchronisation
Three areas for users to focus on.
Time to recognise construction’s top talent.
Future of Green Skills in Sussex
A report on the incoming Green Skills revolution.
Sustainable Futures: Redefining Retrofit for Net Zero Living
The BSRIA Briefing 2024.
When flat roof specification becomes compromised.
Be alert to special features and techniques.
Practising Architect and Director of Sheldon Peever Studio.
Biodiversity net gain, tips and tools for small sites
How to deal with BNG when options become limited.
Registered building inspectors
Building types and conflicts of interest updates explained.
A brief run-down reminder of key points to note.
New electrical apprentice rates
Fair pay for much needed pipeline of electrical apprentices.
BSRIA's commitment to sustainability and net zero
Key documents that represent an early shift in thinking.
A resource for Cleaner Air, Better Tomorrow.