Resin
Resin flooring |
Contents |
[edit] Introduction
Resin is a very broad term used in many applications but typically it describes a synthetic plastic material that has many applications in the construction industry, usually in conjunction with other materials.
Synthetic resins typically comprise synthetic resinous compounds formed by the condensation or polymerisation of:
- Formaldehyde and urea.
- Phenol and formaldehyde.
- Phthalic anhydride and glycerol.
- Polyamides, vinyl derivatives and other sources.
[edit] Synthetic resin adhesive (SRA)
SRAs are made from thermosetting resins such as urea or phenol formaldehyde with the addition of an accelerator to regulate the setting process. They may also be made from thermo-plastic resins such as polymethylmethacrylate or polyvinyl acetate. There are many types on the market, including acrylic resins, MMA (methyl methacrylate) resins and epoxy resins.
[edit] Epoxy resin
Epoxy resin adhesives are used for bonding a wide range of building materials together e.g brick, concrete, metal, stone and wood. Epoxy resin has many applications, including being added to floor screeds to create a durable, non-slip surface; to make waterproof, durable flooring for footbridges, ramps, loading bays, roadways and wet-working environments; added to mortars, coatings and adhesives to impart strength and water resistance; and for injecting cracks in bricks, block, render and concrete.
[edit] Building applications incorporating resin
[edit] Glass reinforced plastic
Glass reinforced plastic GRP is a composite, laminate material produced by impregnating a cloth of woven glass fibres [1] with a synthetic resin, usually polyester-based. It can be mass produced or built-up by hand and, after curing, forms a complex matrix of plastic and glass fibre. It is sometimes referred to as glass reinforced polyester, fibreglass, glass-fibre reinforced plastic (GFRP), fibre reinforced plastic (FRP) or fibre reinforced polymer (FRP).
The composite properties of high-strength glass-fibre and highly resilient plastic make GRP strong, lightweight and weather- and corrosion-resistant. It can also be manufactured to be fire retardant. It is therefore suitable for a very wide range of applications such as cladding panels, boat building, car bodies, cabinets and helmets.
[1] Molten glass that is that is extruded through a die into fine fibres which can then be spun into threads and woven into tapes and cloths.
For more information see: Glass reinforced plastic.
[edit] Plywood
Resin-bonded plywood comprises layers of wood veneer stacked one on top of the other and held together with synthetic resin, glue or glue-impregnated paper; the application of pressure and heat establishes the final product. It is usually water resistant and durable and can be suited to external use.
For more information see: Plywood
[edit] Resin driveways
Resin driveways are created by binding together small-stone aggregates with a resin, usually polyurethane based. The result is typically permeable and may be suitable for inclusion in sustainable urban drainage schemes (SUDS).
There are two types:
- Resin bound systems – these tend to be more popular resulting in a smooth, decorative surface of uniform appearance and durability. They are made by mixing selected coloured aggregates together with a specialist resin. The mix is hand-trowelled until smooth.
- Resin bonded – resin is applied to an existing prepared surface onto which aggregates are scattered, mimicking the appearance of loose gravel.
[edit] Related articles on Designing Buildings Wiki
Featured articles and news
Getting the most out of heat pumps and heating
How heat pumps work and how they work best.
Plumbing and heating for successful retrofit and renovation
Low temperature underfloor systems and heat pumps.
Cost-of-living crisis and home improvement plans
Starting on the right footing and top tips for projects.
Delays on construction projects
Types, mitigation and the acceleration of works.
From Chaucer to Fawlty Towers.
Electrotechnical excellence, now open for entries.
Net zero electricity grids BSRIA guide NZG 5/2024
Outlining the changes needed to transition to net zero.
CIOB Global Student Challenge 2024
Universitas Indonesia wins for second year running.
New project and cultural district described in detail.
The nature of EPCs, crticism and inaccuracies.
History, issues and redesign.
From waste recycling to energy performance the hierchy.
An introduction to WERCS and WEEE responsibilities
Dealing with 2 million tonnes of waste equipment a year.
Global BACS Market: analytics and optimisation
A BSRIA glance at building automation and control systems.
What it is and how to use it.
Types of insulating plaster by binder and insulant.
Investors in People: CIOB achieves gold
Reflecting a commitment to employees and members.
Scratching beneath the surface; a guide to selection.
ECA 2024 Apprentice of the Year Award
Entries open for submission until May 31.
UK gov apprenticeship funding from April 2024
Brief summary the policy paper updated in March.