Building damp-free cavity walls
BRE (Building Research Establishment) is an independent, research-based consultancy, testing and training organisation, operating in the built environment and associated industries.
Building damp-free cavity walls (GG 33 revised) was written by Barry Reeves and Chris Scivyer and published by BRE on 18 March 2015.
In driving rain, water leaks through the outer leaf of most cavity walls, often in quite large quantities. Provided the damp-proofing measures are correctly designed and installed and the wall itself is reasonably free from defects, this water does not reach the inner leaf, but flows harmlessly down the cavity face of the outer leaf until it reaches the footings or is directed out of the cavity via cavity trays or window/door lintels.
However, even though many cavity wall details are long-established and designed with the express purpose that the inner leaf stays dry, dampness is still a common problem. This is generally due to faulty design or construction of damp-proofing measures or the wrong choice of materials.
This 6-page Good Building Guide replaces guidance published in 1999, and offers advice about how to ensure new cavity walls do not suffer from damp. It is intended for architects and other designers, engineers, site managers, house builders and masonry contractors.
Its contents are:
- Introduction.
- Defects in the outer leaf.
- Problems caused by wall ties.
- Defects linked to cavity insulation.
- Where damp-proof courses and cavity trays are needed.
- Installing damp-proof courses.
- Installing cavity trays.
- Weepholes.
- Conclusion.
- References.
- Further reading.
[edit] Find out more.
[edit] Related articles on Designing Buildings Wiki
- BRE articles on Designing Buildings Wiki.
- BRE Buzz articles on Designing Buildings Wiki.
- BRE Buzz.
- BREEAM.
- Building Research Establishment.
- Cavity tray.
- Cavity wall.
- Damp in buildings.
- Damp proof membrane.
- Damp proofing.
- Damp-proof course.
- Dew point.
- Diagnosing the causes of dampness (GR 5 revised).
- Penetrating damp.
- Understanding dampness.
- Wall ties.
- Weep hole.
Featured articles and news
Construction Skills Mission Board launch sector drive
Newly formed government and industry collaboration set strategy for recruiting an additional 100,000 construction workers a year.
New Architects Code comes into effect in September 2025
ARB Architects Code of Conduct and Practice available with ongoing consultation regarding guidance.
Welsh Skills Body (Medr) launches ambitious plan
The new skills body brings together funding and regulation of tertiary education and research for the devolved nation.
Paul Gandy FCIOB announced as next CIOB President
Former Tilbury Douglas CEO takes helm.
UK Infrastructure: A 10 Year Strategy. In brief with reactions
With the National Infrastructure and Service Transformation Authority (NISTA).
Ebenezer Howard: inventor of the garden city. Book review.
The Grenfell Tower fire, eight years on
A time to pause and reflect as Dubai tower block fire reported just before anniversary.
Airtightness Topic Guide BSRIA TG 27/2025
Explaining the basics of airtightness, what it is, why it's important, when it's required and how it's carried out.
Construction contract awards hit lowest point of 2025
Plummeting for second consecutive month, intensifying concerns for housing and infrastructure goals.
Understanding Mental Health in the Built Environment 2025
Examining the state of mental health in construction, shedding light on levels of stress, anxiety and depression.
The benefits of engaging with insulation manufacturers
When considering ground floor constructions.
Lighting Industry endorses Blueprint for Electrification
The Lighting Industry Association fully supports the ECA Blueprint as a timely, urgent call to action.
BSRIA Sentinel Clerk of Works Training Case Study
Strengthening expertise to enhance service delivery with integrated cutting-edge industry knowledge.
Impact report from the Supply Chain Sustainability School
Free sustainability skills, training and support delivered to thousands of UK companies to help cut carbon.
The Building Safety Forum at the Installershow 2025
With speakers confirmed for 24 June as part of Building Safety Week.
The UK’s largest air pollution campaign.
Future Homes Standard, now includes solar, but what else?
Will the new standard, due to in the Autumn, go far enough in terms of performance ?
BSRIA Briefing: Cleaner Air, Better tomorrow
A look back at issues relating to inside and outside air quality, discussed during the BSRIA briefing in 2023.
Restoring Abbotsford's hothouse
Bringing the writer Walter Scott's garden to life.
Reflections on the spending review with CIAT.
Comments
Building damp-free cavity walls involves proper design, construction, and maintenance to prevent the accumulation of moisture within the cavity space. Cavity walls are constructed with an outer and inner leaf separated by a gap known as the cavity. Here are some essential steps to ensure damp-free cavity walls:
1. Proper Design:
Ensure that the cavity wall system is correctly designed to include adequate ventilation and drainage measures. A well-designed cavity will allow water to drain away from the wall effectively.
2. Quality Materials:
Use high-quality materials for the cavity wall construction. This includes appropriate bricks or masonry for the outer and inner leaves, along with durable cavity wall ties and insulation.
3. Cavity Wall Insulation:
Proper insulation helps regulate the internal temperature of the building and prevents condensation. Use suitable insulation materials, and ensure they are correctly installed without gaps or voids.
4. Damp-Proof Course (DPC):
Install a damp-proof course between the inner and outer leaves of the wall. The DPC acts as a barrier to prevent moisture from rising from the ground and entering the building.
5. Cavity Wall Ventilation:
Incorporate ventilation openings at the top and bottom of the cavity to allow air circulation and moisture escape. This helps to maintain dry conditions within the cavity.
6. Cavity Wall Weep Holes:
Weep holes are small openings at the bottom of the cavity wall that allow any water that enters the cavity to drain out. These weep holes should be kept free from obstructions.
7. Cavity Wall Flashings:
Use appropriate flashings, such as lead or plastic, around openings like windows and doors to prevent water from entering the cavity.
8. Regular Inspection and Maintenance:
Periodically inspect the cavity walls for any signs of damage, cracks, or issues that may lead to water penetration. Address any problems promptly to maintain a damp-free cavity.
9. External Landscaping:
Ensure that the ground level surrounding the building slopes away from the walls. This helps to divert rainwater and prevents it from collecting around the base of the building.
10. Address Water Leakage:
If you notice any water leakage or dampness within the cavity wall, investigate the source of the problem and rectify it immediately. This may involve repairing or replacing damaged flashings, weep holes, or pointing.
By following these guidelines and using best practices in cavity wall construction, you can significantly reduce the risk of dampness and ensure the longevity and integrity of the building's structure. It's essential to work with experienced architects, builders, and construction professionals to ensure that all the necessary measures are taken to create damp-free cavity walls.