Stop valve
The Illustrated Guide to Hot and Cold Water Services (BG 33/2014), written by Reginald Brown and published by BSRIA in 2014, it suggests that a stop valve or shut off valve as: ‘Located at the boundary of the property to isolate the water supply to the building and allow maintenance of the water meter. An additional stop valve is located inside the building where the mains water pipe enters the building to shut off the water supply in an emergency or for maintenance.’
--BSRIA
[edit] Related articles on Designing Buildings
Featured articles
Check out some of the best features and news from Designing Buildings as well as key stories from around the web.
The cost of employing people remains a concern.
Code of Practice for Electrical Energy Storage Systems.
ECA calls on members to comment on draft 4th edition.
Bringing together expertise and creating cultural benefits.
CIOB celebrates positive Ofsted report.
The Building Safety Regulator announces a call for evidence.
Government approach could undermine delivery and regeneration.
World's first mass timber data centre.
The overlooked environmental aspect of data centre development.
Introduction to radon awareness
New technical information sheet published by CIOB.
Updated supplier guide can help electrical contractors engage with NHP.
CIAT confirm the winners of the 2026 architectural technology awards.
Government launches a one stop shop for flood preparedness.
Sir Edwin Lutyens: Britain's greatest architect? Book review.