- Project plans
- Project activities
- Legislation and standards
- Industry context
Last edited 13 Dec 2016
Many construction employers think they are providing their project teams with the best high-visibility (hi-vis) work wear, when in fact they are putting their lives at risk this winter, says leading safety equipment specialists OnSite Support.
“At this time of year when construction teams are working outside in low light and poor visibility conditions, they need to be wearing reflective clothing that reflects from all angles,” says safety clothing specialist Chris Wellgreen from OnSite Support. “Clothing that’s visible during the day but almost invisible in low light because it’s dirty or not marked with the proper reflective striping, is a safety hazard which puts workers’ lives at risk.”
To be appropriate for the job and working conditions, reflective workwear must fit properly and meet ISO EN 20471:2013 for high-visibility warning clothing - a European standard, recognised by a ‘CE’ mark. The standard gives safety specifications for coveralls, jackets, waistcoats, tabards, trousers and harnesses.
“There are three classes of hi-vis garments based on their levels of visibility,” explains Chris. “BS EN471 Class 3 is the highest grade and most visible clothing. It includes reflective jackets, coats and trousers, which are essential protective workwear for high-risk construction workers such as marshallers, transport and maintenance teams, particularly if they are working at night.”
All UK employers are required to provide their employees with clean, undamaged hi-vis clothing if they are working in reduced visibility conditions, and ensure that staff know how to wear it correctly and when it is required. Employers are also responsible for maintaining, storing and regularly checking and replacing damaged garments.
“Hi-vis clothing should be comfortable, non-restrictive and provide good visibility during the day, at night, and in poor weather conditions. The best colours for conspicuity are orange or fluorescent yellow and all clothing should have certified reflective strips,” explains Chris. “Just as importantly, these garments should be compatible with other protective workwear and safely secured so that they don’t catch or interfere with the operation of other equipment.”
According to the Health and Safety Executive, around seven workers die and 93 are seriously injured annually by vehicles or mobile plant on construction sites. “Many of these accidents are due to workers not being seen on site and could have been avoided if they had been wearing the right reflective clothing,” says Chris.
 Related articles on Designing Buildings Wiki
- CE Mark.
- Design risk management.
- Dynamic self-retracting lanyard.
- Ergonomics in construction.
- First aider.
- Health and safety file.
- Health and safety.
- Method statement.
- Near miss.
- Permit to work.
- Personal protective equipment.
- Risk assessment.
- Safety briefing.
- Safety helmet colours.
- The Personal Protective Equipment at Work Regulations 1992.
- Toolbox talk.
Featured articles and news
Whole-life costs consider all costs associated with the life of a building, from inception to disposal. Find out more here.
Reports emerge of injuries caused by Apple employees colliding with the campus' glazed walls.
The winners of NIC's ideas competition on transforming the Cambridge to Oxford arc discuss their concept.
Create new habitats and improve air quality and wellbeing.
New report provides 12 key actions which could close the structural talent gap in the construction industry.
These can be used to find out whether a proposed development is likely to be approved. Read more here.
Studying a built environment degree? Check out our helpful student resources section.
New BRE research paper explores how blockchain technology can benefit the built environment industry.
Timber is a natural carbon sink, but it must not end up in landfill at the end of its useful life.
BSRIA has collaborated with the Department of Health on research into air permeability in isolation rooms.