Natural stone cladding
Natural stone cladding is the use of a thin layer of stone as a cladding for the outside of a structure. It is also sometimes used on internal surfaces. When applied properly, the thin layers achieve a textured and three-dimensional appearance, giving the impression that the structure is constructed entirely of natural stone.
Typically, stone cladding is used:
- To give a stone finish to an existing structure.
- To create a stone finish at lower weight, and so with reduced structural support requirements.
- To allow faster and lower cost installation.
- To allow modern the use of modern construction techniques and high-performance detailing, but with a traditional appearance.
- To allow off-site manufacturing, with reduced on-site construction.
- To reduce waste.
Stone cladding is manufactured by quarrying natural stone and milling it into thin pieces. A range of different sizes, thicknesses, shapes and patterns can be created according to the specification of the design. Cladding can be supplied either as single stone pieces, or as large, bespoke panels prefabricated form a number of pieces, such as storey-height panels or shaped parts such as reveals and lintels.
To accommodate the weight of natural stone, the cladding system should be fixed mechanically to structural substrate layers. This can be done using shelf angles or specially-made stone clips.
Alternatively, cladding panels can be made by laminating thin pieces of stone onto a carrier panel made from lightweight concrete. Because the two materials have similar physical characteristics, they work well together as a composite and provide good weather protection.
Where very thin stone pieces are used (around one inch thick), providing a final finish to a substrate such as blockwork, this may be described as a 'stone veneer'.
[edit] Related articles on Designing Buildings Wiki
- Ashlar.
- Brick.
- Brick veneer.
- Building fabric.
- Building with structural stone.
- Choosing stone.
- Cladding.
- Defects in stonework.
- Inspecting stone sample panels.
- Limestone for building.
- Masonry.
- Natural stone.
- Natural stone tiles.
- Patio stone.
- Pebbledash.
- Rustication.
- Stone dressing.
- Sustainable stone.
- Tufa and tuff
- Types of stone.
- Wall types.
Featured articles and news
Guide to ISO 19650 for Architecture Firms (2026)
A user gives their low down.
A UK training and membership provider for mould remediation professionals.
Building Safety recap April, 2026
A short and longer run-through of the month, with links to further information and sources.
CIAT May 2026 briefing.
Independent NSI and BAFE study exploring how organisations are changing the way they buy fire safety services.
From medieval scribes to modern word art.
ECA welcomes crackdown on late payment and push for clean energy, whilst CIOB seek fixed cladding removal timeframes.
Cyber Security in the Built Environment
Protecting projects, data, and digital assets: A CIOB Academy TIS.
Managing competence in the built environment
ITFG publishes new industry guide on how to meet the ICC principles.
The UK's campaign to reduce noise pollution: Mythbusting, articles and topic guides.
Setting Expectations on Competence Management
Industry Competence Committee.
New Scottish and Welsh governments
CIOB stresses importance of construction after new parliament elections.
The sad story of Derby Hippodrome
An historic building left to decay.
ECA, JIB and JTL back Fabian Society call to invest in skills for a stronger built environment workforce.
Women's Contributions to the Built Environment.
Calls for the delayed Circular Economy Strategy
Over 50 leading businesses, trade associations and professional bodies, including CIAT, and UKGBC sign open letter.
The future workforce: culture change and skill
Under the spotlight at UK Construction Week London.
A landmark moment for postmodern heritage.
Comments
A must read book for any civil engineer
STONE CLADDING ENGINEERING
https://www.springer.com/us/book/9789400768475