- Project plans
- Project activities
- Legislation and standards
- Industry context
Last edited 13 Dec 2016
Many construction employers think they are providing their project teams with the best high-visibility (hi-vis) work wear, when in fact they are putting their lives at risk this winter, says leading safety equipment specialists OnSite Support.
“At this time of year when construction teams are working outside in low light and poor visibility conditions, they need to be wearing reflective clothing that reflects from all angles,” says safety clothing specialist Chris Wellgreen from OnSite Support. “Clothing that’s visible during the day but almost invisible in low light because it’s dirty or not marked with the proper reflective striping, is a safety hazard which puts workers’ lives at risk.”
To be appropriate for the job and working conditions, reflective workwear must fit properly and meet ISO EN 20471:2013 for high-visibility warning clothing - a European standard, recognised by a ‘CE’ mark. The standard gives safety specifications for coveralls, jackets, waistcoats, tabards, trousers and harnesses.
“There are three classes of hi-vis garments based on their levels of visibility,” explains Chris. “BS EN471 Class 3 is the highest grade and most visible clothing. It includes reflective jackets, coats and trousers, which are essential protective workwear for high-risk construction workers such as marshallers, transport and maintenance teams, particularly if they are working at night.”
All UK employers are required to provide their employees with clean, undamaged hi-vis clothing if they are working in reduced visibility conditions, and ensure that staff know how to wear it correctly and when it is required. Employers are also responsible for maintaining, storing and regularly checking and replacing damaged garments.
“Hi-vis clothing should be comfortable, non-restrictive and provide good visibility during the day, at night, and in poor weather conditions. The best colours for conspicuity are orange or fluorescent yellow and all clothing should have certified reflective strips,” explains Chris. “Just as importantly, these garments should be compatible with other protective workwear and safely secured so that they don’t catch or interfere with the operation of other equipment.”
According to the Health and Safety Executive, around seven workers die and 93 are seriously injured annually by vehicles or mobile plant on construction sites. “Many of these accidents are due to workers not being seen on site and could have been avoided if they had been wearing the right reflective clothing,” says Chris.
 Related articles on Designing Buildings Wiki
- CE Mark.
- Design risk management.
- Dynamic self-retracting lanyard.
- Ergonomics in construction.
- First aider.
- Health and safety file.
- Health and safety.
- Method statement.
- Near miss.
- Permit to work.
- Personal protective equipment.
- Risk assessment.
- Safety briefing.
- Safety helmet colours.
- The Personal Protective Equipment at Work Regulations 1992.
- Toolbox talk.
Featured articles and news
Almost 90% of freight in London is moved by road. The River Thames could add much needed extra capacity.
National Infrastructure Commission warn that large infrastructure projects are at risk of falling behind.
The quality of Cambridge owes as much to its open spaces as to its architectural uniqueness.
If events occur that cause the completion of the works to be delayed then these may be compensation events.
BSRIA's new Building MOTs Scheme is designed to provide guidance on the next steps after compliance.
At an ICE discussion, the focus was on delivering a Northern Infrastructure Strategy based on opportunity for all.
The Considerate Constructors Scheme officially launch the new Ultra Site status for contractors and supply chains.
The risk of specification errors in the cladding sector is "worryingly high" after Grenfell, according to major distributor.
Here is our outline work plan for a private sector design and build project.
BRE are to publish new guidance aimed at assuring buyers as to the merits of off-site construction methods.