Portable Appliance Testing (PAT)
Contents |
[edit] Introduction
In the UK, portable appliance testing (PAT) is a process that ensures electrical appliances are safe for use. An electric appliance can be taken as meaning any electrically-powered household appliance as well as appliances used in commercial and industrial applications e.g construction sites.
[edit] What testing is required?
Testing requires an examination of the appliance. In most cases, visual checks may suffice to reveal any defects. However, some appliances will require proper testing by qualified personnel. It is important to note that for some defects visual examination is essential as faults may not be detected by testing alone.
Using a checklist that forms part of a periodic electrical maintenance regime, trained users may find it useful to carry out a brief examination of the appliance, depending on the type of equipment and the environment in which it is used. However, it may be necessary to revert to a competent person for more formal visual inspection and testing.
Portable Appliance Testing is covered by the Electricity at Work Regulations 1989 which require that electrical appliances that have the capacity to cause injury should be maintained in a safe condition. However, the regulations do not specify what requires to be done, how frequently it should be undertaken and by whom. In other words, there is no legal requirement to inspect or test electrical equipment. Despite this, responsible employers usually have items such as desk lamps, desk-top power sockets, coffee machines and kettles tested on an annual basis. The items are usually labelled with the date testing was last carried which acts both as a management record and also demonstrates to staff that testing has indeed been carried out.
[edit] Frequency of testing
This will depend on the type of appliance and its use. A drill used on a daily basis on a construction site is likely to require more frequent testing than a low-power consumption domestic floor lamp.
[edit] Who does the testing?
For simple appliances in low-risk environments that require only a visual inspection, all that is required is competency; this may be undertaken by a staff member if they have the knowledge and training. For more complex equipment and applications requiring both visual and electrical testing, a better qualified person such as an electrician will be required.
It should be remembered that PAT is not compulsory. However, employers must ensure their equipment is in a good state of repair to avoid causing injury.
[edit] Related articles on Designing Buildings Wiki
- Articles by the Electrical Contractors' Association (ECA).
- Developing system intelligence for optimising building electricity networks.
- Electric vehicles.
- Electricity supply.
- Energy storage.
- Flexible electrical networks for a low carbon future.
- Kilowatt hour.
- Micro-grids.
- Power factor.
- Subsidy-free low carbon electricity.
- The Future of Electricity in Domestic Buildings.
- The use of batteries to store electricity for buildings.
[edit] External references
Featured articles and news
Combating burnout.
The 5 elements of seiri, seiton, seiso, seiketsu and shitsuke.
Shading for housing, a design guide
A look back at embedding a new culture of shading.
The Architectural Technology Awards
The AT Awards 2025 are open for entries!
ECA Blueprint for Electrification
The 'mosaic of interconnected challenges' and how to deliver the UK’s Transition to Clean Power.
Grenfell Tower Principal Contractor Award notice
Tower repair and maintenance contractor announced as demolition contractor.
Passivhaus social homes benefit from heat pump service
Sixteen new homes designed and built to achieve Passivhaus constructed in Dumfries & Galloway.
CABE Publishes Results of 2025 Building Control Survey
Concern over lack of understanding of how roles have changed since the introduction of the BSA 2022.
British Architectural Sculpture 1851-1951
A rich heritage of decorative and figurative sculpture. Book review.
A programme to tackle the lack of diversity.
Independent Building Control review panel
Five members of the newly established, Grenfell Tower Inquiry recommended, panel appointed.
Welsh Recharging Electrical Skills Charter progresses
ECA progressing on the ‘asks’ of the Recharging Electrical Skills Charter at the Senedd in Wales.
A brief history from 1890s to 2020s.
CIOB and CORBON combine forces
To elevate professional standards in Nigeria’s construction industry.
Amendment to the GB Energy Bill welcomed by ECA
Move prevents nationally-owned energy company from investing in solar panels produced by modern slavery.
Gregor Harvie argues that AI is state-sanctioned theft of IP.
Experimental AI housing target help for councils
Experimental AI could help councils meet housing targets by digitising records.