Computerised managed maintenance system CMMS
Contents |
[edit] Introduction
A computerised managed maintenance system (CMMS) is a computer-based software approach to maintenance management. It evolved in the late 1980s and early 1990s as building professionals began to use computer aided design (CAD) and computer aided facilities management (CAFM) tools. Unlike CAD and CAFM, CMMS helps organise and automate the record keeping process that was formerly paper based.
[edit] Components of CMMS
The cornerstone of CMMS software is to support maintenance throughout facilities. CMMS can also help maintenance planners, engineers and supervisors to schedule, monitor and execute maintenance tasks in compliance with regulatory and health and safety requirements.
The types of maintenance that can be supported include:
- Equipment.
- Preventive maintenance.
- Work order management.
- Scheduling/planning of labour and projects.
- Vendor management.
- Inventory and asset control.
- Purchasing and budgets.
Other aspects of CMMS may include:
- Root cause analysis
- Predictive maintenance
- Financial costs/asset lifecycle analysis
[edit] Types of CMMS
Historically, CMMS was offered as a software package. Today, some CMMS programmes are web-based and supported through a Software as a Service (SaaS) approach. Many are available for tablets or mobile devices, suitable for onsite use.
CMMS software can be industry specific, but there are general approaches that are suitable for most sectors.
[edit] CMMS vs EAM
As a type of work order management system, CMMS uses data collected from equipment located throughout a facility to monitor inventory, track work orders, generate reports and initiate preventive maintenance actions. Unlike enterprise asset management systems (EAM), it does not typically have the ability to evaluate the costs of assets, from design to installation to disposal. However, it does capture the information so it can be used by an EAM system to analyse data, identify trends and locate problem areas (such as cost increases, productivity decreases or recurring repairs).
In the most basic terms, CMMS is a tangible maintenance tool used for managing facilities whilst EAM is a strategic business tool used for managing assets.
[edit] Related articles on Designing Buildings Wiki
Featured articles and news
Open industry engagement survey seeks responses
Institutions and the importance of engagement.
National Retrofit Hub unveils new guide
Digital Building Logbooks and Retrofit: An Introduction.
Top 50 firms awarded 52bn of projects in the last year
New engineering data shows.
Enhancing construction site reporting efficiency
Through digitisation and the digital revolution.
Noise in the built environment
BSRIA guide TG 20/2021.
17,000 people suffer conditions as a result of exposure to excessive noise at work.
Turning down the noise: Auditory health
A pervasive risk with far-reaching consequences.
Getting the most out of heat pumps and heating
How heat pumps work and how they work best.
Plumbing and heating for successful retrofit and renovation
Low temperature underfloor systems and heat pumps.
Cost-of-living crisis and home improvement plans
Starting on the right footing and top tips for projects.
Delays on construction projects
Types, mitigation and the acceleration of works.
From Chaucer to Fawlty Towers.
Electrotechnical excellence, now open for entries.
Net zero electricity grids BSRIA guide NZG 5/2024
Outlining the changes needed to transition to net zero.
CIOB Global Student Challenge 2024
Universitas Indonesia wins for second year running.
ECA 2024 Apprentice of the Year Award
Entries open for submission until May 31.