Brick bats and closures
Where necessary, bricks can be cut to special sizes or shapes, for example to finish off a wall at the corners.
Bricks that are cut along their length are sometimes referred to as closers, while those cut across their width are referred to as brick bats. Some common types of closers and brick bats include:
- Queen closer (half) - a half a brick cut lengthways, used at a course end next to the quoin header.
- Queen closer (quarter) - a quarter brick cut lengthways.
- King closer - regular length and thickness a long bevel from one side to about halfway across the adjacent end, leaving a three-quarter brick length for finishing a course on the inside of a corner.
- Bevelled closer - a chamfered half brick cut width ways.
- Mitred closer - a chamfered half brick cut width ways to 45 to 60 degrees.
- Standard bat - a square cut brick across the short length. (not to be confused with a bat brick)
- Half bat - a square cut brick across the short length leaving half. (not to be confused with a bat brick)
- Three-quarter bat - a square cut brick across the short length leaving three quarters. (not to be confused with a bat brick)
- Bevelled bat - an angle cut brick across the short length, at varying distances.
- (Bat brick - a different type of brick entirely and merely describes a brick that is designed with a thin slot on the face and a hollow into the brick, specifically to create a habitat for wild bats in urban areas.)
NB Short Guide: Traditional Scottish Brickwork, published, on 1 March 2014 by Historic Environment Scotland, defines a closer brick as: ‘A brick cut or specifically moulded to expose a half header on the face of a wall and used to complete bonding patterns.’
[edit] Related articles on Designing Buildings
Featured articles and news
Grenfell Tower fire – eight years on
A time to pause and reflect as Dubai tower block fire reported just before anniversary.
Airtightness Topic Guide BSRIA TG 27/2025
Explaining the basics of airtightness, what it is, why it's important, when it's required and how it's carried out.
Construction contract awards hit lowest point of 2025
Plummeting for second consecutive month, intensifying concerns for housing and infrastructure goals.
Understanding Mental Health in the Built Environment 2025
Examining the state of mental health in construction, shedding light on levels of stress, anxiety and depression.
The benefits of engaging with insulation manufacturers
When considering ground floor constructions.
Lighting Industry endorses Blueprint for Electrification
The Lighting Industry Association fully supports the ECA Blueprint as a timely, urgent call to action.
BSRIA Sentinel Clerk of Works Training Case Study
Strengthening expertise to enhance service delivery with integrated cutting-edge industry knowledge.
Impact report from the Supply Chain Sustainability School
Free sustainability skills, training and support delivered to thousands of UK companies to help cut carbon.
The Building Safety Forum at the Installershow 2025
With speakers confirmed for 24 June as part of Building Safety Week.
The UK’s largest air pollution campaign.
Future Homes Standard, now includes solar, but what else?
Will the new standard, due to in the Autumn, go far enough in terms of performance ?
BSRIA Briefing: Cleaner Air, Better tomorrow
A look back at issues relating to inside and outside air quality, discussed during the BSRIA briefing in 2023.
Restoring Abbotsford's hothouse
Bringing the writer Walter Scott's garden to life.
Reflections on the spending review with CIAT.
Retired firefighter cycles world to raise Grenfell funds
Leaving on 14 June 2025 Stephen will raise money for youth and schools through the Grenfell Foundation.
Key points for construction at a glance with industry reactions.
Functionality, visibility and sustainability
The simpler approach to specification.