Counterbore
A counterbore, might be called a countersink (which also used to describe the tool designed to make a counterbore), is where a second drill hole is made after a pre-drill hole or bore (for a screw length), this is normally only a partial drill hole and usually with angle edges. It is made to allow the head of the screw to sink into the wood or metal further so that the screw or bolt head lies flush with the surface of the wood or metal being fixed.
[edit] Related articles on Designing Buildings
- Carpentry.
- Facts about forestry.
- Janka hardness rating scale.
- Nails - a brief history.
- Sustainable timber.
- Staircase.
- The differences between hardwood and softwood.
- The use of timber in construction.
- Timber.
- Timber vs wood.
- Types of timber.
- Types of timber species.
- Whole life carbon assessment of timber.
- Wood around the world.
Featured articles
Check out some of the best features and news from Designing Buildings as well as key stories from around the web.
Construction Management, 2 June
Construction deaths halve in two years.
Green Book changes to drive investment in all parts of UK.
Minimum energy efficiency standards (MEES)
CIAT briefing on response to consultations for privately rented non-domestic properties.
Connect, collaborate, shape the future
Registration now live for UK Construction Week Birmingham.
CIOB announces Saul Humphrey FCIOB as new President for 26/27 term.
A quick, simple, and zero-bills solution to prevent overheating.
The adaptive reuse of large industrial structures.
Promoting the circular economy by extending the life of buildings.
CIAT responds to Climate Change Committee report
An urgent wake-up call for both government and the built environment.
Construction Management, 24 June
FMB pilot aims to build pipeline of site-ready tradespeople.
A quick introduction.
CLC publishes Mental Health Joint Code of Practice.
A quick introduction to its uses and risks.
Comments
[edit] To make a comment about this article, or to suggest changes, click 'Add a comment' above. Separate your comments from any existing comments by inserting a horizontal line.