The bay method of estimating
The bay method of estimating, is an approach used to estimate, costs, materials amounts, quanitities or volumes where a certain elements are repetitive. The term bay usually refers to a compartment or section of a building that repeats, as such it is often used for buildings that have multiple and similar visible compartments such as factory units, warehouses, garages or transport interchanges.
The quantities of materials and/or labour, and thus costs of a single compartment is calculated by estimating in detail through measurements off drawings or 3D models (in the case of BIM, often using material take-off). Then the single unit value is multiplied by the number of compartments or units to be constructed. The individual compartments, units, rooms, elements or bays of the building should be identical or at least very similar for the estimating method to be accurate.
There are many different types of estimating with the bay method of estimating being just one approach. It is worth noting that, in general traditional approaches to the estimating of building quantities have changed with the introduction of CAD, to 3D CAD and modelling, and through to the employment of Building Information Modelling or BIM.
[edit] Related articles on Designing Buildings
- Analogous estimating.
- Approximate bill of quantities.
- Approximate quantities cost plan.
- Bill of quantities.
- Common mistakes in bill of quantities.
- Comparison of SMM7 with NRM2.
- Cost estimating.
- Cost plan.
- Cost.
- Elemental cost plan.
- Elemental estimating.
- Estimate.
- Extra over (EO).
- How to take off construction works.
- Measured quantity.
- New Rules of Measurement.
- Operational rate estimating.
- Parametric estimating.
- Payment.
- Price.
- Procurement.
- Spot items.
- Standard Method of Measurement (SMM7).
- Taking off construction works.
- Top down and bottom up estimating.
- Unit rate estimating.
- Working up construction works.
Featured articles and news
Scottish parents prioritise construction and apprenticeships
CIOB data released for Scottish Apprenticeship Week shows construction as top potential career path.
From a Green to a White Paper and the proposal of a General Safety Requirement for construction products.
Creativity, conservation and craft at Barley Studio. Book review.
The challenge as PFI agreements come to an end
How construction deals with inherited assets built under long-term contracts.
Skills plan for engineering and building services
Comprehensive industry report highlights persistent skills challenges across the sector.
Choosing the right design team for a D&B Contract
An architect explains the nature and needs of working within this common procurement route.
Statement from the Interim Chief Construction Advisor
Thouria Istephan; Architect and inquiry panel member outlines ongoing work, priorities and next steps.
The 2025 draft NPPF in brief with indicative responses
Local verses National and suitable verses sustainable: Consultation open for just over one week.
Increased vigilance on VAT Domestic Reverse Charge
HMRC bearing down with increasing force on construction consultant says.
Call for greater recognition of professional standards
Chartered bodies representing more than 1.5 million individuals have written to the UK Government.
Cutting carbon, cost and risk in estate management
Lessons from Cardiff Met’s “Halve the Half” initiative.
Inspiring the next generation to fulfil an electrified future
Technical Manager at ECA on the importance of engagement between industry and education.
Repairing historic stone and slate roofs
The need for a code of practice and technical advice note.
Environmental compliance; a checklist for 2026
Legislative changes, policy shifts, phased rollouts, and compliance updates to be aware of.