How to waterproof a rooflight
[edit] Introduction
There are many reasons why a rooflight might start leaking. It could be the result of an inadequate installation, or the rooflight may have been damaged after being exposed to high winds or suffering an impact. In some cases, a leak can even turn out to be not a leak at all, but a condensation problem.
Even a small leak can be a source of inconvenience for a building’s occupants, and it could damage expensive equipment or decorations. Problems such as damp and mould can also result from a leaking rooflight, leading to uncomfortable conditions and potential health hazards.
[edit] Methods for waterproofing rooflights
As with any type of building penetration, there are several ways to waterproof a rooflight, and the right choice will depend on the roof construction, as well as the finished appearance that you wish to achieve.
In residential buildings with pitched roofs, for example, rrooflight installations are typically sealed using flashings with tiles layered carefully over the top for a weatherproof finish.
However, this method will not work on most commercial buildings – particularly those with flat or low-pitched roofs and no roof tiles. So other techniques will be required. Although a waterproof rooflight can be achieved with materials such as EPDM rubber, or even traditional roofing felt, GRP is one of the best ways to ensure a leak-free result that will look good and last for many years with minimal maintenance.
[edit] Related articles on Designing Buildings
Featured articles and news
Plumbing and heating for successful retrofit and renovation
Low temperature underfloor systems and heat pumps.
Cost-of-living crisis and home improvement plans
Starting on the right footing and top tips for projects.
Delays on construction projects
Types, mitigation and the acceleration of works.
From Chaucer to Fawlty Towers.
Electrotechnical excellence, now open for entries.
Net zero electricity grids BSRIA guide NZG 5/2024
Outlining the changes needed to transition to net zero.
CIOB Global Student Challenge 2024
Universitas Indonesia wins for second year running.
New project and cultural district described in detail.
The nature of EPCs, crticism and inaccuracies.
History, issues and redesign.
From waste recycling to energy performance the hierchy.
An introduction to WERCS and WEEE responsibilities
Dealing with 2 million tonnes of waste equipment a year.
Global BACS Market: analytics and optimisation
A BSRIA glance at building automation and control systems.
What it is and how to use it.
Types of insulating plaster by binder and insulant.
Investors in People: CIOB achieves gold
Reflecting a commitment to employees and members.
Scratching beneath the surface; a guide to selection.
ECA 2024 Apprentice of the Year Award
Entries open for submission until May 31.
UK gov apprenticeship funding from April 2024
Brief summary the policy paper updated in March.