Fluctuation of the supply voltage flicker
BSRIA Power quality guide (AG 2/2000) was written by C C Pearson and V Uthayanan and published by BSRIA in July 2000. It states:
Voltage fluctuations are systematic variations of the voltage envelope or a series of random voltage changes, within the normal voltage range of nominal ± 10%.
Loads which can exhibit continuous, rapid variations in the load current can cause voltage variations that are often referred to as flicker. The term flicker is derived from the impact of the voltage fluctuation on lamps such that they are perceived to flicker by the human eye. Voltage fluctuation is an electromagnetic phenomenon whilst flicker is an undesirable result of the voltage fluctuation in some loads.
The flicker signal is defined by its rms magnitude expressed as a percent of the fundamental. Typically, magnitudes as low as 0.5% can result in perceptible lamp flicker if the frequencies are in the range of 6-8 Hz.
--BSRIA
[edit] Related articles on Designing Buildings
Featured articles
Check out some of the best features and news from Designing Buildings as well as key stories from around the web.
CIAT responds to Climate Change Committee report
An urgent wake-up call for both government and the built environment.
Construction Management, 24 June
FMB pilot aims to build pipeline of site-ready tradespeople.
A quick introduction.
CLC publishes Mental Health Joint Code of Practice.
A quick introduction to its uses and risks.
Construction Management, 17 June
Government rolls out digital planning tool to all local authorities.
Your views needed - a strategy for the professions, trades and occupations.
Confronting competency, codes, capacity and costs.
The hidden risk in modern construction supply chains.
Construction Management, 10 June
24 months to 14: CITB launches accelerated apprenticeships.
Bridging the gap between clients and contractors
Concerns remain around contractor quality, capability, and delivery.