Dowel
A dowel is a small circular peg or fastener, often made from timber with a ribbed circumference. It is used in the construction of dowel joints, where holes are drilled within the two sections of timber being joined, dowels are inserted into one side, often with glue, then the second side is connected. The term is also used to described the connection of other materials such as metals, plastic and concrete (see also Dowelled joint).
In carpentry they are similar to biscuit joints as a way to connect two sections of timber, hiding the fixings, without using screws and increasing the surface area that is glued. The ribbed circumference of the dowels ensure a tight fit, holding the joint in place whilst the glue dries and increasing the strength of the joint over time. Dowels can be used to connect many different types of joints, such as edge joints, L joints, T joints, mitre joints, carcass joints and so on.
The word dowel seems to stem from middle English in the 1300's, describing parts of a wheel, most probably resembling wooden pins of some some kind with once side chamfered. The word dowel today tends to refer to timber connectors that are hidden within the joint, which differs from peg or tree nails (sometimes also mistakenly referred to as dowels).
In traditional green wood or oak framing tree nails or pegs were made of dried seasoned wood, often beech and were a key part of the morticle and tennon joint. In this method the joint would be set together and holes drilled from the outside of the wet or green wood through the two joining timber sections, the dry peg would then be driven in from the outside, connecting the timbers. The dry dowels absorb the moisture of the green wood and expand ensuring a tight connection, over time both the timber sections and the pegs dry out to form a permanent rigid connection.
The different in general between pegs and dowels being that the ends of the pegs are exposed, often cut flush to the wood surface, where as dowels are hidden and within the joint, being installed before the joint is placed in position and most often using glue. The word dowel can also refer to other materials such as plastic, metal and even stone, the principle being that they are cylindical connectors, hidden within a joint.
[edit] Related articles on Designing Buildings
- Cabinet maker.
- Carcass.
- Carpentry.
- Chip carving.
- Fibre saturation point FSP
- Geodesic dome.
- Greenwood timber.
- Moisture content.
- Mortise and tenon joints.
- Mortise vs mortice.
- Nails - a brief history.
- Physical Properties of Wood.
- Plumb level.
- Rip sawing.
- Rub joint.
- Sanding.
- Scarf joint.
- The Art of Pyrography.
- The history of timber construction in the UK.
- Timber.
- Timber gridshell.
- Timber preservation.
- Timber v wood.
- The best woods for carving.
- Timber.
- Timber vs wood.
- Tongue and groove joint.
- Tool and equipment care and maintenance.
- Types of nails.
- Types of timber.
- Veneer.
- Violet Pinwill, woodcarver.
- Waney edged.
- Wattle and daub.
- Wood figure.
- Workmanship.
Featured articles and news
Infrastructure that connect the physical and digital domains.
Harnessing robotics and AI in challenging environments
The key to nuclear decommissioning and fusion engineering.
BSRIA announces Lisa Ashworth as new CEO
Tasked with furthering BSRIA’s impressive growth ambitions.
Public buildings get half a million energy efficiency boost
£557 million to switch to cleaner heating and save on energy.
CIOB launches pre-election manifesto
Outlining potential future policies for the next government.
Grenfell Tower Inquiry announcement
Phase 2 hearings come to a close and the final report due in September.
Progress from Parts L, F and O: A whitepaper, one year on.
A replicated study to understand the opinion of practitioners.
ECA announces new president 2024
Electrical engineer and business leader Stuart Smith.
A distinct type of countryside that should be celebrated.
Should Part O be extended to existing buildings?
EAC brands heatwave adaptation a missed opportunity.
Definition of Statutory in workplace and facilities management
Established by IWFM, BESA, CIBSE and BSRIA.
Tackling the transition from traditional heating systems
59% lack the necessary information and confidence to switch.
The general election and the construction industry
As PM, Rishi Sunak announces July 4 date for an election.
Eco apprenticeships continue help grow green workforce
A year after being recognised at the King's coronation.
Permitted development rights for agricultural buildings
The changes coming into effect as of May 21, 2024.