Ball valve
The Illustrated Guide to Mechanical Building Services, Third Edition (BG 31/2017), by David Bleicher, published by BSRIA in 2017, suggests that a ball valve is: ‘Used as an isolation valve on pipework typically up to 50 mm nominal bore. Located either side of fittings that require regular maintenance, and for isolating sections of pipework.’
Guide to Controls (BG 83/2023) written by John Marrow and published by BSRIA in June 2023, suggests that ball valves: ‘…are used in applications where pipe sizes are from 15 mm to 20 mm. They are used to control the flow of hot or chilled water in terminal or fan coil units. They operate by moving a ball-shaped insert within the valve body to open or close the valve. These valves can have characterised shaped ports or characterised balls to offer a linear flow characteristic. Higher pressures on these valves can be closed off by low torque actuators.’
--BSRIA
[edit] Related articles on Designing Buildings
Featured articles and news
Noise in the built environment
BSRIA guide TG 20/2021.
17,000 people suffer conditions as a result of exposure to excessive noise at work.
Turning down the noise: Auditory health
A pervasive risk with far-reaching consequences.
UK Construction Week, London is here !
Debuting major international pavilions and much more.
Getting the most out of heat pumps and heating
How heat pumps work and how they work best.
Plumbing and heating for successful retrofit and renovation
Low temperature underfloor systems and heat pumps.
Cost-of-living crisis and home improvement plans
Starting on the right footing and top tips for projects.
Delays on construction projects
Types, mitigation and the acceleration of works.
From Chaucer to Fawlty Towers.
Electrotechnical excellence, now open for entries.
Net zero electricity grids BSRIA guide NZG 5/2024
Outlining the changes needed to transition to net zero.
CIOB Global Student Challenge 2024
Universitas Indonesia wins for second year running.
New project and cultural district described in detail.
ECA 2024 Apprentice of the Year Award
Entries open for submission until May 31.
UK gov apprenticeship funding from April 2024
Brief summary the policy paper updated in March.