Subliming ablators
Ablative materials in design and construction, are materials that are generally resistant to high temperatures in one of three ways and used for thermal protection. Subliming ablators perform through sublimation and eventual melting.
Subliming ablators, act as heat sinks until the surface of the material reaches sublimation or melting point (thus also referred to as - subliming / melting ablators), thus removing the heat from the protected object. In some cases a layer of gas is formed which helps remove heat from the object, in other cases an endothermic reaction occurs increasing the material temperature whilst decreasing the surrounding temperature, sacrificially.
In doing this ablative materials may pyrolyse mitigating a heat load, so in effect they decompose or change as a result of the heat being applied. For example ablative coating might contain hydrates, as they are heated, they decompose, and water vapour is released, this has a cooling effect, the insulation characteristics of the charred remains after the water is vaporised can slow the heat transfer. These types of materials are also often carbon related composites such as Teflon.
Two other types of related ablative materials are charring ablators and Intumescent ablators.
[edit] Related articles on Designing Buildings
Featured articles
Check out some of the best features and news from Designing Buildings as well as key stories from around the web.
Building Safety Act implementation in Wales
CIAT to host industry panel on 26 June.
New and updated CLC building safety guidance.
New UK National Buildings Database.
Building Safety Wiki Interviews
Chief executive of the British Woodworking Federation.
Planning condition discharge in England and Wales
A brief explanation from a building compliance expert, with further links.
Overheating guidance and tools for building designers
Guidance for dealing with element of building fabric control that have increasing importance.
Shading for housing, a design guide
From the Good Homes Alliance and British Blind and Shutter Association.
UK Standard Skills Classification (SSC)
A shared framework for describing skills needs.
Social media ban consultation comes to close
CIOB urges UK Government to consider social media’s role in careers guidance in ban debate.
The latest of eight Skills England apprenticeship units
The addition of battery manufacturing welcomed by ECA with a warning about the risks of fast-tracked apprenticeship units.
Building Control Independent Panel final report
A precis of a key report led by Dame Hackitt with full recommendations and link to the government response.
Comments
[edit] o make a comment about this article, click 'Add a comment' above. Separate your comments from any existing comments by inserting a horizontal line.