Process control
Introduction to Construction Quality Planning, Applying APQP to construction manufacturing, published by the Construction Innovation Hub in December 2019, states process control (PC): ‘…enables monitoring of the process in such a way that any variation showing instability in the process can be quickly identified and acted upon. In the manufacturing sector, this is referred to as ‘special cause variation’. By getting rid of such ‘special cause variation’ the process becomes stable and quality becomes predictable. More advanced process controls can be established as the manufacturing process becomes more mature. Process capability indices are sometimes used to monitor the KCs or CIs identified by the DFMEA (Design Failure Mode and Effects Analysis). These indices provide for monitoring the short-term and long-term capability of a given process. Therefore, clients and tier 1 contractors can be assured that the supply chain have achieved minimum acceptable maturity through the adoption of this toolset.’
[edit] Related articles on Designing Buildings
- Advanced product quality planning.
- Construction Innovation Hub.
- Construction product approval process.
- Construction quality planning.
- Not right first time.
- Plan, Do, Check, Act (PDCA).
- Product design requirements.
- Product validation.
- Production readiness review.
- Project quality plan.
- Quality control.
- Quality cost and delivery.
- Quality in construction projects.
- Quality load and capacity report.
Featured articles
Check out some of the best features and news from Designing Buildings as well as key stories from around the web.
The hidden risk in modern construction supply chains.
Construction Management, 10 June
24 months to 14: CITB launches accelerated apprenticeships.
Bridging the gap between clients and contractors
Concerns remain around contractor quality, capability, and delivery.
Construction Management, 10 June.
Heat pumps beat boilers in new home tests.
Building Safety Act implementation in Wales
CIAT to host industry panel on 26 June.
New and updated CLC building safety guidance.
New UK National Buildings Database.
Building Safety Wiki Interviews
Chief executive of the British Woodworking Federation.
Planning condition discharge in England and Wales
A brief explanation from a building compliance expert, with further links.
Overheating guidance and tools for building designers
Guidance for dealing with element of building fabric control that have increasing importance.
Shading for housing, a design guide
From the Good Homes Alliance and British Blind and Shutter Association.