Fall arrest system
A personal fall arrest system (FAS) is a system designed to minimise injury if a worker should fall from a significant height and experience impact. The purpose of the system is not to stop the fall (that is the purpose of a fall restraint system or fall prevention system), but to limit the injuries that could happen to a worker as a result of the fall's impact.
Fall arrest systems can be permanently installed. They can be used during recurring height related tasks (such as window cleaning, gutter work or regularly scheduled maintenance).
This system is made up of components that may include a body harness, an anchor, a connector, a lanyard, a deceleration device and a lifeline.
These systems must be professionally installed and should be regularly inspected to ensure compliance with health and safety and CDM regulations (Construction Design and Management) regulations. These can be internal inspections carried out by the contractor, third party audits or external inspections by the Health and Safety Executive.
Fall arrest systems should be replaced when necessary. Training is required for proper usage.
Personal fall arrest systems are most commonly used in situations where a fall is possible and a collective restraint system or fall prevention system is not in place.
[edit] Related articles on Designing Buildings Wiki
- BS 7883.
- BS 7883 guide released.
- Collective restraint systems.
- Dynamic self-retracting lanyard.
- Fall prevention systems.
- FASET.
- Hoists.
- Injuries on construction sites.
- Personal fall protection system.
- Safety in high places.
- Safety systems for working at heights.
- Site safety.
- Work at height checklist for managers.
- Work at height regulations.
- Work at height.
- Working at height - our duty to prevent harm and protect each other.
- Working at height training.
[edit] External resources
- Health and Safety Executive, A technical guide to the selection and use of fall prevention and arrest equipment, 2005.
- Health and Safety Executive, Inspecting fall arrest equipment made from webbing or rope, 2009.
- Health and Safety Executive, The Construction (Design and Management) Regulations 2015, 2015.
Featured articles and news
Shading for housing, a design guide
A look back at embedding a new culture of shading.
The Architectural Technology Awards
The AT Awards 2025 are open for entries!
ECA Blueprint for Electrification
The 'mosaic of interconnected challenges' and how to deliver the UK’s Transition to Clean Power.
Grenfell Tower Principal Contractor Award notice
Tower repair and maintenance contractor announced as demolition contractor.
Passivhaus social homes benefit from heat pump service
Sixteen new homes designed and built to achieve Passivhaus constructed in Dumfries & Galloway.
CABE Publishes Results of 2025 Building Control Survey
Concern over lack of understanding of how roles have changed since the introduction of the BSA 2022.
British Architectural Sculpture 1851-1951
A rich heritage of decorative and figurative sculpture. Book review.
A programme to tackle the lack of diversity.
Independent Building Control review panel
Five members of the newly established, Grenfell Tower Inquiry recommended, panel appointed.
Welsh Recharging Electrical Skills Charter progresses
ECA progressing on the ‘asks’ of the Recharging Electrical Skills Charter at the Senedd in Wales.
A brief history from 1890s to 2020s.
CIOB and CORBON combine forces
To elevate professional standards in Nigeria’s construction industry.
Amendment to the GB Energy Bill welcomed by ECA
Move prevents nationally-owned energy company from investing in solar panels produced by modern slavery.
Gregor Harvie argues that AI is state-sanctioned theft of IP.
Experimental AI housing target help for councils
Experimental AI could help councils meet housing targets by digitising records.
BSRIA Occupant Wellbeing survey BOW
Occupant satisfaction and wellbeing tool inc. physical environment, indoor facilities, functionality and accessibility.