Distributed fibre-optic strain sensors
The development of distributed fibre-optic strain sensors has resulted in new techniques for monitoring structures and infrastructure such as foundations, embankments and tunnel linings. They offer the opportunity for cost-effectively sensing strain and temperature with a spatial resolution of around 1 metre using conventional fibre-optic cable, either attached to or embedded in a structure. Bending in the cable creates strain in the fibre which can be measured with a fibre optic analyser using the BOTDR (Brillouin Optical Time Domain Reflectometer) or BOTDA (Brillouin Optical Time Domain Analysis) technique. There is no wiring and no electromagnetic interference.
Distributed fibre-optic strain sensors can be used for:
- The measurement of strain in foundations.
- Failure prediction in tunnels and bridges.
- The measurement of strain in oil, gas, and water pipelines.
- Monitoring embankments to predict landslides.
- Measuring structural deformation in nuclear facilities.
Crucial to the effectiveness of this technique of monitoring is the method of attachment to structures. It is important to avoid unintentional twisting or damage to the fibre optic cable and to make sure that the sensor does not creep from attachment points, producing measurement errors. This involves not only the selection of suitable attachment technologies, but also appropriate installation training.
[edit] Find out more
[edit] Related articles on Designing Buildings Wiki
[edit] External references
- Cambridge Smart Infrastructure and Construction (CSIC), Distributed fibre-optic strain sensors.
Featured articles and news
The 5 elements of seiri, seiton, seiso, seiketsu and shitsuke.
Shading for housing, a design guide
A look back at embedding a new culture of shading.
The Architectural Technology Awards
The AT Awards 2025 are open for entries!
ECA Blueprint for Electrification
The 'mosaic of interconnected challenges' and how to deliver the UK’s Transition to Clean Power.
Grenfell Tower Principal Contractor Award notice
Tower repair and maintenance contractor announced as demolition contractor.
Passivhaus social homes benefit from heat pump service
Sixteen new homes designed and built to achieve Passivhaus constructed in Dumfries & Galloway.
CABE Publishes Results of 2025 Building Control Survey
Concern over lack of understanding of how roles have changed since the introduction of the BSA 2022.
British Architectural Sculpture 1851-1951
A rich heritage of decorative and figurative sculpture. Book review.
A programme to tackle the lack of diversity.
Independent Building Control review panel
Five members of the newly established, Grenfell Tower Inquiry recommended, panel appointed.
Welsh Recharging Electrical Skills Charter progresses
ECA progressing on the ‘asks’ of the Recharging Electrical Skills Charter at the Senedd in Wales.
A brief history from 1890s to 2020s.
CIOB and CORBON combine forces
To elevate professional standards in Nigeria’s construction industry.
Amendment to the GB Energy Bill welcomed by ECA
Move prevents nationally-owned energy company from investing in solar panels produced by modern slavery.
Gregor Harvie argues that AI is state-sanctioned theft of IP.
Experimental AI housing target help for councils
Experimental AI could help councils meet housing targets by digitising records.
BSRIA Occupant Wellbeing survey BOW
Occupant satisfaction and wellbeing tool inc. physical environment, indoor facilities, functionality and accessibility.