Differential pressure anemometer
Commissioning Air Systems (BG 49/2015), written by Chris Parsloe and published by BSRIA in March 2015, explains how to commission ducted air distribution systems in buildings. It was originally published in 2013 and was then updated in 2015.
It states: ‘A differential pressure anemometer has no rotating parts and is closer in operating principle to the pitot tube than the rotating vane anemometer. However, the instrument has a similar profile to a 100 mm rotating vane anemometer and will fit into a similar proprietary plastic hood. The accuracy of the device is often dependent on the associated micromanometer used to display the readings, but typically it has an equivalent accuracy to the rotating vane anemometer at ±5% of the indicated value if calibrated for flow rate, or ±2% of the indicated value and ± 0.05 m/s when calibrated for air velocity.’
--BSRIA
[edit] Related articles on Designing Buildings
Featured articles
Check out some of the best features and news from Designing Buildings as well as key stories from around the web.
CLC publishes Mental Health Joint Code of Practice.
A quick introduction to its uses and risks.
Construction Management, 17 June
Government rolls out digital planning tool to all local authorities.
Your views needed - a strategy for the professions, trades and occupations.
Confronting competency, codes, capacity and costs.
The hidden risk in modern construction supply chains.
Construction Management, 10 June
24 months to 14: CITB launches accelerated apprenticeships.
Bridging the gap between clients and contractors
Concerns remain around contractor quality, capability, and delivery.
Construction Management, 10 June.
Heat pumps beat boilers in new home tests.
Building Safety Act implementation in Wales
CIAT to host industry panel on 26 June.
New and updated CLC building safety guidance.